Brother International VX-940 Users Manual - English - Page 7
Operating, Sewing, Machine
View all Brother International VX-940 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Operating Your Sewing Machine 1111111111 CONNECTING PLUGS 1. First connect the three-prong plug into the machine. 2. Then connect the electric supply plug into a wall outlet. Caution When changing needle, bobbin or light bulb, or when sewing machine is not in use, it is recommended that electrical supply plug is disconnected to avoid electrical hazards. Remark: The illustration on this page depicting the use of two pin plug is not applicable to use in U.K. CONTROLLING SEWING SPEED Place foot on foot control as shown in illustration. When foot control is pushed down lightly, machine will run at a low speed. When pressure on foot control is increased, machine will pick up speed. When foot control is released, machine will stop. NOTE: 1. When the machine is not in use, make sure that nothing is placed on the foot controller. 2. When the machine is new or has not been used for a long time, it is recommended you oil according to the instructions on pages 39 and 40. Wipe up an extra oil after that. -5-