Brother International VX-940 Users Manual - English - Page 40
Maintenance, Machine
View all Brother International VX-940 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Maintenance and 9 Care of Your Machine Cleaning The sliding parts of the shuttle race should be cleaned regularly so that l int does not accumulate. Retaining ring a Latch lever Hook 0 HOW TO REMOVE THE SHUTTLE HOOK 1 . Raise needle to its highest position. 2. Open shuttle cover. 3. Take out bobbin case. 4. Push latch levers outside and remove retaining ring. 5. Remove hook by grasping center post of hook. NOTE: When needle is lowered shuttle hook cannot be removed. Driver 0 Race body Retaining ring CLEANING SHUTTLE RACE 1. Remove accumulated lint and thread from the retaining ring, hook, driver and race body with brush. 2. A cloth dampened with machine oil should be used to wipe shuttle race clean. 3. Clean shuttle hook in same manner as above. 4. Reassemble. CLEANING FEED DOG 1. Take out needle plate. 2. Clean upper part of feed dog and shuttle race body with brush. O - 38 -