Canon 2064B001 DC210 Manual - Page 34

34 Playback IMPORTANT The following may not be displayed correctly. - Images not recorded with this camcorder. - Images edited on or uploaded from a computer. - Images whose file names have been changed. Avoid the following actions while the disc access display ( ) appears on screen, and when the DISC access indicator is on or flashing. Failing to do so may result in permanent data loss. - Do not subject the camcorder to vibrations or strong impacts. - Do not open the disc cover and do not remove the disc. - Do not disconnect the power source or turn off the camcorder. - Do not change the position of the / switch or the operating mode. Slideshow SLIDESHOW lever toward W to extend the green selection frame to the whole page, and move ( ) between index pages. Move the zoom lever toward T to return to moving between single images. 3 Move the zoom lever toward T. The index screen closes and the selected image is displayed. Image Jump Function You can also quickly locate a specific image without having to browse all of them one by one. TO RUN THROUGH THE STILL IMAGES Push the joystick ( ) or ( ) and hold it pressed down to run quickly through the still images. TO SKIP 10 OR 100 STILL IMAGES FUNC. ( 25) 1 Press FUNC. . 2 Select ( ) [ SLIDESHOW] and press ( ). 3 Select ( ) [START] and press ( ). • Images are played back one after another. • Press FUNC. to stop the slideshow. Index Screen 1 Move the zoom lever toward W. The still images index screen appears. 2 Select ( , ) an image. • Move the green selection frame to the image you want to view. • If you have a lot of still images, you may find it easier to browse entire index pages instead. Move the zoom 1 If the joystick guide does not appear on screen, press ( ) to display it. 2 Push the joystick ( ) toward . 3 Select ( ) [ JUMP 10 IMAGES] or [ JUMP 100 IMAGES]. 4 Jump ( ) the number of images selected. Press ( ) to close the image jump screen and display the image. You can press ( ) again to hide the joystick guide.