Canon 2064B001 DC210 Manual - Page 41

Menu Options Lists 41 System Setup (Volume, Beep, etc.) SYSTEM SETUP VOLUME ( 33) BEEP [ HIGH VOLUME], [ LOW VOLUME], [ OFF] A beep will accompany some operations like turning on the camcorder, the selftimer countdown, etc. It also serves as a warning beep under unusual conditions. POWER SAVE [ ON], [ OFF] In order to save power when the camcorder is powered by a battery pack, it will automatically shut off if left without any operation for 5 minutes. Approximately 30 seconds before the camcorder shuts off, the message " AUTO POWER OFF" will appear. In Quick-Start ready mode, the camcorder will shut off after the time selected for the [ STANDBY OFF] setting. STANDBY OFF ( 31) [ 10 min], [ 20 min], [ 30 min] Select the length of time after which the camcorder will end the Quick-Start ready mode and shut off automatically. FILE NOS. [ RESET], [ CONTINUOUS] Select the image numbering method to be used on a new disc. Images are automatically assigned consecutive image numbers from 0101 to 9900, and stored in folders containing up to 100 images. Folders are numbered from 101 to 998. [ RESET]: Image numbers will restart from 101-0101 every time you insert a new disc. [ CONTINUOUS]: Image numbers will continue from the number following that of the last image recorded with the camcorder. If the disc you insert already contains an image with a larger number, a new image will be assigned a number one higher than that of the last image on the disc. We recommend using the [ CONTINUOUS] setting. TV TYPE [ NORMAL TV], [ WIDE TV] In order to display the picture in full and in the correct aspect ratio, select the setting according to the type of television to which you will connect the camcorder. [ NORMAL TV]: TV sets with 4:3 aspect ratio. [ WIDE TV]: TV sets with 16:9 aspect ratio. When the TV type is set to [ NORMAL TV], if you play back a recording made in widescreen (16:9) the picture displayed on the LCD screen will be smaller than the full display area. Advanced Functions