Canon 2080B001 XL H1S / XL H1A Instruction Manual
Canon 2080B001 - XL H1S Camcorder Manual
 |
UPC - 013803079685
View all Canon 2080B001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Canon 2080B001 manual content summary:
- Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 1
PUB. DIM-870 English Français Español HD Video Camera Recorder Instruction Manual Caméscope et lecteur vidéo HD Manuel d'instruction Videocámara y grabadora HD Manual de Instrucciones NTSC35 - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 2
TO REDUCE ANNOYING INTERFERENCE, USE THE RECOMMENDED ACCESSORIES ONLY. COPYRIGHT WARNING: Unauthorized recording of copyrighted materials may infringe on the rights of copyright owners and be contrary to copyright laws. HD Video Camera Recorder, XL H1S A / XL H1A A Systems. This device complies - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 3
"product" refers to the Canon HD Video Camera Recorder XL H1S A / XL H1A A and all its accessories. 1. Read Instructions - All the safety and operating instructions should be read before the product is operated. 2. Retain Instructions - The safety and operating instructions should be retained for - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 4
you follow the operating instructions. Adjust only those controls that are covered by the operation instructions. Improper adjustment of other service. 20. Replacement Parts - When replacement parts are required, be sure the service technician has used replacement parts that are specified by Canon - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 5
The XL H1S / XL H1A - A Broad Range of Capabilities Ultimate HD Quality New and improved lens The HD 20x L IS III is the latest addition to the XL line of high-end interchangeable lenses and now features a built-in iris ring for improved operability. 3CCD system By using three 1/3-in. CCDs (each - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 6
Thank you for purchasing the Canon XL H1S / XL H1A. Please read this manual carefully before you use the camcorder and retain it for future reference. Should your camcorder fail to operate correctly, refer to Troubleshooting ( 150). Conventions Used in this Manual : Precautions related to the - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 7
About the HD/HDV and SD/DV Specifications In the manual, a distinction is made between video signal standards (camera section) and recording standards (recorder section). The video signal can be set to HD (high definition) or SD (standard definition) specifications; the recording standard on the - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 8
Contents Introduction The XL H1S / XL H1A - A Broad Range of Capabilities 5 About this Manual ...6 Checking the Supplied Accessories ...10 Components Guide ...11 Preparations Preparing the Power Supply ...17 Preparing the Camcorder ...21 Preparing the Lens ...27 Using the Wireless Controller ...30 - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 9
Digital Video Control...92 Recording an External Video Signal (HDV/DV In, Analog Line-In 93 Converting Analog Signals into Digital Signals (Analog-Digital Messages ...144 Maintenance/Others...145 Troubleshooting...150 System Diagram ...152 Optional Accessories ...154 Specifications ...157 Index... - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 10
wireless controller) Microphone Unit Stereo Cable DTC-1000 Component Video Cable External Monitor Cable Adjustment Band (for the external Adapter Holder Unit microphone holder) Tripod Adapter Base SS-1100 Shoulder Strap Camcorder Dust Cap Canon HD Video Lens 20x Zoom XL 5.4-108 mm L IS III - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 11
Components Guide Left side view dial External control mode* VCR/PLAY mode Power off Manual Auto Shutter- LENS RELEASE switch ( 27) SET button ( 33) SELECT dial ( 33)/IRIS dial ( 65, 68) (record review) button ( 39) BARS/FADE SELECT button ( 83) BARS/FADE ON/OFF button ( 83) MENU button ( 33 - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 12
Left side view Viewfinder unit/Microphone unit HD 20x L IS III lens Eye cup ( 22) Dioptric adjustment lever ( 23) Color viewfinder ( 21-24) STEREO/MONO microphone selector ( 58) Lock screw ( 23) Viewfinder cable ( 21) Lock release button ( 24) Iris ring ( 65, 68) Zoom ring ( 42) Lens hood ( 28) - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 13
Right side view Introduction S-video terminal ( 88) VIDEO OUT terminal (BNC) ( 88) VIDEO IN/OUT terminal (RCA) ( 88) OUT terminals (CH1/CH2, RCA) ( 90) IN terminals (CH1/CH2, RCA) ( 58) Terminal cover Battery attachment unit ( 17) BATT. RELEASE button ( 17) HD/SD SDI terminal* ( 86) GENLOCK - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 14
base Tripod socket Viewfinder cable ( 21) Remote sensor LEVEL dial (headphone) terminal HDV indicator ( 40) HDV/DV terminal ( 87, COMPONENT OUT terminal ( 87) , Using tripods Do not use tripods with mounting screws longer than 5.5 mm (0.2 in.) as this may cause damage to the camcorder. To use - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 15
Top view Introduction PHOTO button ( 121) / MAGN. button ( 108) START/STOP button ( 36) Hot shoe ( 126) Microphone ( 25) Viewfinder lock screw ( 21) Handle zoom lever ( 42) EJECT switch ( 31) CUSTOM KEYS ( 79) EVF DISPLAY button ( 39) CUSTOM PRESET ON/OFF button ( 99) CUSTOM PRESET SELECT button ( - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 16
WL-D5000 Wireless Controller PHOTO button ( 121) START/STOP button ( 36) MENU button ( 33) TV SCREEN button ( 80) SLIDESHOW button ( 127) DATA CODE button ( 117) INDEX WRITE button ( 80) AUDIO MONITOR button ( 90) END SEARCH button ( 41) SEARCH SELECT button ( 116, 117) REC PAUSE button ( 93) REW - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 17
Pack 1. Turn the dial to OFF. 2. Attach the battery pack to the camcorder. Align the battery pack with the guideline and press lightly. Slide the battery of the arrow, until it clicks. 3. Remove the battery pack after use. Holding the BATT. RELEASE button pressed down, slide the battery pack down - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 18
picture interference. Move the compact power adapter away from the TV or the antenna cable. Do not connect to the compact power adapter any products not expressly recommended for use with this camcorder. If you connect a faulty compact power adapter or battery pack, the charge indicator turns - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 19
235 min. 320 min. HDV Maximum Recording Time HD 20x L IS III Lens Supplied color viewfinder FU-1000 monochrome viewfinder2 HD 20x L IS II Lens -1000 monochrome viewfinder2 105 min. 160 min. 225 min. 310 min. 16x Manual Zoom Lens Supplied color viewfinder 150 min. 225 min. 310 min. 435 min - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 20
HDV Maximum Recording Time HD 20x L IS III Lens Supplied color viewfinder FU-1000 monochrome viewfinder2 HD 20x L IS II Lens Supplied color viewfinder FU-1000 monochrome viewfinder2 HD 110 min. 165 min. 235 min. 315 min. 16x Manual Zoom Lens Supplied color viewfinder 155 min. 235 min. 335 - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 21
onto the bracket and tighten the lock screw. 2. Connect the viewfinder cable to the EVF1 socket on the camcorder. Insert the cable plug straight into the camcorder's socket. 3. Hook the viewfinder cable onto the cable clamp. To use the optional FU-1000 Monochrome CRT Viewfinder Unit, connect it to - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 22
the left or right eye. Detach the eye cup and reattach it when changing the position of the eye cup for right or left eye use. Attaching the Eye Cup Align the hole for the dioptric adjustment lever with the lever, and pull the eye cup into position. Right eye - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 23
Loosen the bottom lock screw, adjust the viewfinder forward/backward and tighten the screw. Lock screw Lock screw Dioptric Adjustment Turn on the camcorder and adjust the dioptric adjustment lever. Do not let the viewfinder be exposed to direct sunlight or other strong light sources. The - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 24
. • For more details regarding the [EVF BW MODE] setting refer to page 81. 5. Press the MENU button to close the menu. Using the Viewfinder as LCD Panel You can use the viewfinder as an LCD panel by opening the eyepiece adapter. Press the lock release button and open the eyepiece adapter. Make - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 25
the mark on the microphone with the mark on the microphone holder and tighten the lock screw. 3. Plug the microphone cable to the camcorder's FRONT MIC terminals. To use an external microphone with a diameter too small for the microphone holder to close securely, attach first the supplied adjustment - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 26
microphone receiver. 1. Attach the adapter holder and secure it by tightening the screws. 2. Adjust the position of the support bars. Support bars When using the optional CH-910, hook it onto the support bars and secure it with the stop lever. To detach the CH-910, press the stop lever in the - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 27
while cleaning the lens. Proper operation cannot be guaranteed when recording in HDV standard with lenses that were not designed for HDV recording. If you attach such a lens to the camcorder, the messages "THIS LENS HAS NO STILL SHOOTING CAPABILITY" and "HD INCOMPATIBLE LENS" will appear. 27 - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 28
in HDV standard with the optional Extender XL 1.6x. The message "HD INCOMPATIBLE LENS" will appear when using the extender, even with an HD- by the camcorder (AF) or manually (MF). The camcorder can store and back up flange back adjustment values for up to 10 different lenses. Preparations 1. - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 29
confirmation screen appears, press the SET button to begin the adjustment. 5. The camcorder will zoom in to full telephoto. When the message "ADJUST FOCUS & PUSH lens. 1. Press the MENU button. 2. Turn the SELECT dial to select [CAMERA SETUP] and press the SET button. 3. Select [FB] and then select - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 30
Using the Wireless Controller When you press the buttons on the wireless controller, point it at one of the camcorder's remote sensors. The camcorder has 3 remote sensors: 2 at the front and 1 at the back. Inserting the Batteries The wireless controller operates with two AA (R6) batteries. 1. Open - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 31
marked with the logo. For recording in HDV we recommend you use videocassettes designed for HDV recording. 1. Slide the EJECT switch to open get your fingers caught in the cassette compartment. If the camcorder is connected to a power source, cassettes can be loaded/removed even if the dial is - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 32
Removing a Memory Card You can use SDHC (SD High Capacity) memory cards, (MMC) with this camcorder. Inserting the Card 1. Set to use memory cards of over 2 GB with devices that do not support SDHC. However, SDHC devices (including this camcorder) are backward compatible and you can use regular - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 33
Changing Settings with the MENU Button Many of the camcorder's functions can be changed from the on-screen menu. Selecting of these controls in specific situations. You may find it more convenient to use the wireless controller to operate the menu. Press the MENU button on the wireless controller to - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 34
INFO•••OFF Open the menu and select [DISPLAY SETUP/ [D/T DISPLAY] and close the menu. ]. Select [GUIDE INFO], set it to If you do not use the camcorder for a period of approximately 3 months, the built-in rechargeable battery will discharge completely and the date and time settings will be lost - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 35
to the menu item to change the setting. The displays and at the bottom of the screen refer to the names of buttons on the camcorder and will not change regardless of the language selected. Preparations 35 - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 36
to check if the camcorder operates correctly. If necessary, clean the video heads ( 148). The default recording standard is HDV. About the audio recording start recording. Turn the dial to OFF if you do not intend to use the camcorder for a long time. If you do not remove the cassette, you - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 37
be shut down to the camera and recorder sections but camera settings (including exposure lock and color bars settings) will be retained. Press the STANDBY button again to turn the camcorder on. Power Save Function In order to protect the tape and video heads, the camcorder will enter the power - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 38
depending on the condition under which the battery pack and camcorder are used. SHUTTER indicator Lights up when recording with a shutter speed higher. Reference guides With the [DISPLAY SETUP/ ] [MARKERS], [ASPECT GUIDE] and [SAFETY ZONE] settings you can display reference guides to help you - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 39
Level 2: Customized displays ( 110), date/time2 Level 33: Markers, safety zone guides, date/time2 Level 4: No displays 1 This level cannot be selected if [ review) button. The camcorder rewinds the tape, plays back the last few seconds, and returns to record pause mode. If the current video signal - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 40
the position of the MODE SELECT switch. • HD: To record on the tape in HDV standard or to use the camcorder as a high-definition (HD) camera. • SD 16:9, SD 4:3: To record on the tape in DV standard or to use the camcorder as a standard-definition (SD) camera. Select the aspect ratio as desired. If - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 41
You can use this function to locate the end of the last recorded scene. Press the END SEARCH button. • appears. • The camcorder rewinds/ used once you remove the cassette. The end search function may not work correctly if there is a blank section between recordings or if you mixed recordings in HDV - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 42
a slower zoom; press harder for faster zooms. Approximate zoom speeds using the HD 20x L IS III lens (from full wide-angle to full telephoto is too fast (less than 2 seconds end-to-end), the camcorder will have more trouble focusing automatically while zooming. Zoom ring: The zoom speed depends on - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 43
a fixed focal length lens is used, no zoom-related indications will appear on screen. Zoom Preset (lenses with zoom preset function) This attach the optional Extender XL 1.6x or mount a lens with a different magnification. To return to the preset zoom position the camcorder uses the speed set for - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 44
Functions in this chapter are explained using the HD 20x L IS III lens. If you are using a different lens, refer also to the instruction manual of the lens. The camcorder can be set to Autofocus or Manual Focus. Autofocus In addition to the usual autofocus, the camcorder has also a Push-AF function - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 45
Manual focus cannot be selected in Easy Recording mode. Even if you set the focus mode switch to M, the autofocus will still be activated. When using a lens designed for HDV be displayed when the optional Extender XL 1.6x is attached to the camcorder. - Use the focusing distance display as an - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 46
manual focusing easier, you can use displayed on the camcorder's viewfinder screen. is to the HD/SD SDI terminal ( only) and the HDV/DV terminal. video or record a still image on the memory card. In mode, the Magnifying function will always be canceled when you press the PHOTO button. You can use - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 47
PSET• 4 Open the menu and select [CAMERA SETUP]. Select [F SPEED PSET], select a setting option and close the menu. 4 is the fastest speed; 1 is the slowest. Returning to the Preset Focus position Move the POSITION PRESET ON/SET switch to ON. The camcorder returns to the preset focus position - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 48
Limit) Usually the camcorder's focus range allows macro shooting. You can activate the focus limit to restrict the focus range. Using the HD 20x L IS III lens, the focus range 10 cm - (at full wide-angle) is limited to 1 m - (throughout the entire zoom range). MENU ( 33) CAMERA SETUP FOCUS LIMIT - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 49
the ND Filter (lenses with built-in ND filter) When recording in bright surroundings, the camcorder will set a small aperture value and the picture may appear blurred. When using a lens with a built-in ND filter, turn the ND filter on/off according to the screen display. With the HD 20x L IS III - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 50
, the same as standard-definition TV signals. 30F Mode HD Records 30 frames per second according to HDV native 1080/30p specifications. For playback, the signal is converted to 60i but video output from the HDV/DV terminal will be 30p. SD The picture captured by the camera at 30 frames per second - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 51
[CAMERA SETUP]. Select [24F MODE SEL], select a setting option and close the menu. • [2:3]: "24F" appears in white. • [2:3:3:2]: "24F" appears in orange. If you are using an editing system that does not support the 2:3:3:2 pulldown method, make sure to record in 24F 2:3 pulldown mode. Video - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 52
runs only when recording, starting from a preset value. [FREE-RUN]: The time code runs regardless of the operation of the camcorder. (Cannot be selected when recording in standard definition (SD) with the frame rate se to 24F.) MENU ( 33) SIGNAL SETUP TIME CODE COUNT-UP REC-RUN 1. Open the - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 53
codes (including 24F frame rate in SD mode), there might be a discontinuity in the time code at the point where the recording starts. When recording over existing scenes: the time code at the point where the recording starts may be discontinuous as well. As long as the built-in rechargeable lithium battery - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 54
signal* SMPTE-standard LTC timing signal * As a reference video signal input you can use either an HD Y signal or an NTSC composite video signal. While a time code signal is being received, the [FRAME SETTNG] and [COUNT-UP] settings of the camcorder will be ignored and the external time code - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 55
; the correct time code will be restored once you reconnect the cable. - Turning the camcorder off/on. - Changing the position of the dial to or on the side panel will disappear). When the camcorder is set to HD standard, Genlock synchronization is possible even if the external Genlock - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 56
code consisting of 8 characters in the hexadecimal system that is useful for labeling tapes. There are sixteen possible characters: the numbers recording with the camcorder or from analog devices. The user bit set in the camcorder cannot be recorded when recording from digital devices (HDV or DV). - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 57
dubbed using this camcorder. • Audio recorded with this camcorder is locked audio except for audio recorded from an analog input, or from a digital input to [NORMAL] or [HIGH] (+6 dB) to match the recording conditions. [NORMAL]: To record audio under usual conditions. [HIGH]: To record audio at - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 58
phantom power on. Keep the microphone connected when turning off the phantom power. • Use commercially available microphones. 2. Set the INPUT SELECT switch to XLR MIC or XLR connecting a microphone that does not support phantom power, make sure to set the switch to OFF. Otherwise the microphone may - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 59
Select [XLR ALC LINK], select a setting option and close the menu. Manual Audio Adjustment 1. Set the REC LEVEL switch to M. 2. Turn the corresponding only occasionally. We recommend using headphones when adjusting the audio level. If the input level is too high, audio may become distorted even - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 60
limiter can be activated if at least one of the channels is set to manual audio adjustment. Open the menu and select [AUDIO SETUP]. Select [AUD.LIMITER], refers to the superimposing of the audio signal along with the video signal being output from the HD/SD SDI terminal. [ON]: To embed the audio. - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 61
conditions. To turn off the image stabilizer using the HD 20x L IS III lens: Set the STABILIZER ON/OFF switch to OFF. The image stabilizer cannot be turned off in Easy Recording mode. We recommend turning off the image stabilizer when the camcorder is mounted on a tripod. The image stabilizer - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 62
and aperture levels. Auto Like the Easy Recording mode, the camcorder automatically controls camera adjustments allowing you to simply point and film. However, in Auto mode you have the option of adjusting the settings manually. Shutter-Priority ( 67) Use this mode to select the shutter speed. The - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 63
Easy Recording The camcorder automatically controls the focus, shutter speed, Skin detail Clear scan Frequency selection for clear scan 1 Available during exposure lock. 2 Available during clear scan. 3 Only lenses with manual iris ring. - -1 -1 - 2 - - - - -1 - -1 - - (0) - (0 dB) - - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 64
All other modes Focus ring Zoom ring Iris ring Image stabilizer2 See previous table - (ON) ND filter Focus mode selection - (AF) XAF switch (Push-AF) - 1 HD 20x L IS III, HD 20x L IS II, HD 6x L, 20x L IS and 16x IS II lenses. 2 Not available with the HD 6x L lens. 64 - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 65
(calculated by the camcorder). The mark of the indicator indicates the current exposure level within ± 2 EV stops of the standard exposure (beyond 2 stops, the marker will blink). 2. Select the aperture using the IRIS dial or the iris ring (only lenses with manual iris ring, like the HD 20x L IS - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 66
function of the AE SHIFT dial on the optional ZR-2000 Zoom Remote Controller and use it to change the aperture value. Push AE In M Manual mode you can use the Push AE function when you want the camcorder to re-establish optimal exposure settings by automatically adjusting the aperture and gain (if - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 67
1/15, 1/30, 1/60, 1/100, 1/250, 1/500 * Only with the HD 20x L IS II or HD 20x L IS III Lens. 1. Set the dial to Tv. 2. Select the shutter speed (aperture, etc.) are adjusted automatically. Using exposure lock to adjust the exposure manually will change the shutter speed, overriding the shutter - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 68
dial to Av. 2. Select the aperture using the IRIS dial or the iris ring (only lenses with manual iris ring, like the HD 20x L IS III lens). With the ND filter is activated, the picture may become dark when you set a high aperture value. In such case, turn off the ND Filter first and readjust the - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 69
appears. Use the exposure indicator as an estimate. • The mark above the indicator indicates the standard exposure (calculated by the camcorder). The of the EXP. LOCK button. AE Shift You can use the AE Shift control to manually override the automatic exposure system in order to darken or - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 70
Use video noise and artifacts (white dots, vertical streaks or blocking). When the GAIN dial is set to A (automatic gain control) you can activate the gain limit to prevent the camcorder from setting a level higher than a preset limit between 3 dB and 15 dB. Open the menu and select [CAMERA - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 71
White Balance The camcorder uses an electronic white balance process to calibrate the picture for values. WHITE BALANCE dial AWB (outdoor) (indoor) (color temperature) Custom Preset A, B Use Automatic adjustment of white balance. Bright sunlight (5,600 K). Incandescent light (3,200 K). Setting - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 72
As long as the built-in rechargeable lithium battery is charged, the camcorder retains the custom white balance setting even if you turn it off. Readjust the custom white balance if you turn the ND filter on/off (lenses with a built-in ND filter) or when the light source has changed. - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 73
Zebra Pattern This camcorder has a zebra pattern feature that shows black and white diagonal stripes over the areas that are overexposed. The zebra pattern is only displayed on the - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 74
can set the camcorder to detect the picture. Determining the Color to be Corrected MENU ( 33) CAMERA SETUP COLOR CORR. ···· ···· A AREA SEL. COLOR PHASE basic color phase (0-15) of the color to be detected. Use the following values as an approximate reference: 0=purple, 3=red, - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 75
Activating the Color Correction MENU ( 33) CAMERA SETUP COLOR CORR. CORRECT OFF 1. Open the menu and select [CAMERA SETUP] and select the [COLOR CORR.] submenu. 2. Select [CORRECT], select a correction mode and close the menu. • You can correct only the predefined A area, only the - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 76
you can set the camcorder to detect the characteristics Area MENU CAMERA SETUP ( 33) SKIN DETAIL HUE 0 CHROMA 0 AREA 0 Y LEVEL 0 1. Open the menu, select [CAMERA SETUP] and MENU ( 33) CAMERA SETUP SKIN DETAIL EFFECT LEVEL••OFF 1. Open the menu and select [CAMERA SETUP]. Select the - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 77
Noise Reduction With the selective noise reduction function you can set the camcorder to detect the characteristics of a certain color or tone and automatically reduce noise in the targeted areas. This is particularly useful for chroma keying, as targeting the selective noise reduction to the color - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 78
screen or other equipment without displaying black band or flicker on the screen. You can adjust the frequency from 60.1 Hz to 203.9 Hz. MENU CAMERA SETUP ( 33) CLEAR SCAN•••60.1Hz 1. Set the dial to Tv or M. 2. Repeatedly press the SHUTTER button to set the shutter speed to "CS". 3. Open - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 79
Custom Keys You can assign frequently used functions to the custom keys. The custom keys can Open the menu and select [DISPLAY SETUP/ The following functions can be assigned to the custom keys: ]. Select [GUIDE INFO], set it to [CUSTOM KEYS] and close the ]. Select [CUSTOM KEY], set it to [ON] and - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 80
to the custom key and close the menu. When you do not wish to use the custom keys, select [(NONE)]. Activating the Functions with the Custom Key [TIME the camera settings, while the recorder section of the camcorder is powered off so you do not need to worry about the tape or the video heads. - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 81
-OUT*, HD/SD SDI*, (LANC) and HDV/DV terminals will not be put on hold. The time code superimposed on the video signal output from the COMPONENT OUT, VIDEO IN/OUT and IN/OUT (S-Video) terminals will be put on hold. (* only.) • The time code hold will be canceled when you turn the camcorder on/off - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 82
the displayed image both upside/down and right/left. This affects only the display, and the video signal being output from all terminals will not change. • When using XL lenses designed for HDV recording, the Flip EVF function will be deactivated while displaying the menu screens. • Flip EVF can - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 83
can generate and record color bars signals and a 1 kHz audio reference signal. With the customized functions ( 104) you can choose between SMPTE standard-definition color bars ([TYPE 1]) and ARIB multiformat HDTV color bars ([TYPE 2]) and you can also select the strength of the audio signal (-12 dB - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 84
recording in high definition, video output from the HD/SD SDI terminal will be an uncompressed HD, YPbPr signal. You can down-convert the video output with the respective menu settings. Recording standard and frame rate HD/SD SDI terminal1 Unchanged Downconverted2, 5, 6 COMPONENT OUT terminal - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 85
HD/SD SDI Terminal* COMPONENT OUT Terminal HDV/DV Terminal HD [LETTERBOX] 1920x1080 set to [OFF] D3 (1440x1080) MPEG TS VIDEO camcorder's viewfinder screen. Use the supplied external monitor cable to connect to a monitor or TV equipped with component video inputs. External Monitor Cable - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 86
Connection to a High Definition Monitor or HDTV 1 Using the HD/SD SDI Terminal White Red Stereo Cable* (supplied) Signal flow White Red INPUT VIDEO L AUDIO R S (S1)-VIDEO Open the terminal cover BNC Cable (commercially available) Signal flow * If [SDI OUTPUT] is set to [OFF] (no embedded - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 87
[COMP.OUT], select a setting option and close the menu. 3 Using the HDV/DV Terminal External Connections CV-250F DV Cable (optional) or commercially available 6 pin-6 pin DV cable 4-pin 6-pin • When connecting the camcorder to a monitor or TV that supports DV input, you may need to carry out - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 88
Red INPUT VIDEO L AUDIO R S (S1)-VIDEO * To use the VIDEO terminals instead of the terminal, connect the TV to the camcorder's VIDEO OUT terminal using a BNC cable (commercially available), or connect the TV to the camcorder's VIDEO IN/OUT terminal using an RCA video cable (commercially available - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 89
played automatically in widescreen mode whether you connect the camcorder to the TV using the S (S1-) VIDEO terminal or the VIDEO terminal. During fast forward playback, rewind playback and reverse playback of a tape recorded in HDV standard, the picture may be distorted. 89 External Connections - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 90
/CH2 CH1/CH1 CH2/CH2 ALL CH/ALL CH CH1/CH2. • During playback of a tape recorded with 4-channel audio (using another device) or while recording external video with 4-channel audio from the HDV/DV terminal, the output channels will be: CH1·3/CH2·4 CH1·3/CH1·3 CH2·4/CH2·4 ALL CH/ALL CH. Selecting the - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 91
Audio Output Selected CH1/CH2 CH3/CH4 CH1·3/CH2·4 CH1/CH1 CH3/CH3 CH1·3/CH1·3 CH2/CH2 CH4/CH4 CH2·4/CH2·4 ALL CH/ALL CH Audio Recordings on 2 Channels Left Output: L or CH1 Right Output: R or CH2 Left Output: L or CH1 Right Output: L or CH1 Left Output: R or CH2 Right Output: R or CH2 Left Output: - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 92
Digital Video Control This feature enables the camcorder to control the record and stop functions of an external digital device connected to the camcorder through the HDV/DV terminal. The device must comply with the IEEE1394 AV/C protocol. Use the optional CV-250F (4 pin-6 pin) DV cable or a - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 93
an external video signal, either from the HDV/DV input (SD or HD standard) or from the analog video input (SD standard). External Connections HDV/DV In When recording from an external digital device you can select the time code to be used for the recording made with this camcorder. Select [COPY - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 94
Converting Analog Signals into Digital Signals (Analog-Digital Converter) Using the camcorder you can convert analog video input signals to a digital video signal (SD standard) and output it through the HDV/DV terminal. MENU ( 33) SIGNAL SETUP AV DV OFF Open the menu and select [SIGNAL SETUP]. - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 95
you are using. If the computer is not compatible with the camcorder's video output signal, the camcorder may not be correctly detected or may not operate properly. Refer also to the instruction manual of the computer and the editing software. Adjust the [SIGNAL SETUP] [PLAYBACK STD] and [HD DOWN - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 96
camcorder and memory card. Custom preset files saved with a Canon XL H1, XH G1 or XH A1 can be used with this camcorder. Custom preset files saved with this camcorder can be used on a Canon gradation Group 2 Parameters related to noise and definition of contour lines Group 3 Parameters related to - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 97
Enter the custom preset editing screen Save the custom preset file to the memory card Read a custom preset file from the memory card Back to the [CUSTOMIZE] submenu Select the custom preset file Change the custom preset settings Rename the custom preset file File name of the currently selected - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 98
Renaming a Custom Preset File Follow steps 1-3 in Changing Custom Preset Parameters ( 97) to select the custom preset file you want to rename. 1. From the bottom bar, select [ RENAME]. The first character of the custom preset file name will start flashing. 2. Turn the SELECT dial to select a number, - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 99
last to first) ( 79). • When you are not using the custom preset settings, set the camcorder to . • and the name of the selected custom preset select [CUSTOMIZE] and then select the [CUSTOM PRESET] submenu. 2. Select [ CAMERA CARD] from the column on the left. 3. From the bottom bar, select - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 100
preset file you want to read. Use the + / - buttons to move [META DATA CP]. 3. Select [ CARD CAMERA] from the column on the left. 4. values by resetting all the camcorder's settings. Open the menu the same default settings. Custom Preset [7 VIDEO.C] Custom Preset [8 CINE.V] Custom Preset [9 - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 101
]: appropriate for video telecined from film. [CINE2]: appropriate for transfer to film. Output [NORMAL] [CINE1] [CINE2] [KNE] Knee Point Adjustment Adjust the dynamic range (knee point) in the highlight area of the image to prevent overexposure. You can select from [AUTO], [HIGH], [MIDDLE] or - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 102
sharpness level in the range -9 to +9. Noise artifacts caused by too-high sharpness settings can be reduced using the coring setting. [HDF] Horizontal Detail Frequency Select the horizontal definition of the image from [HIGH], [MIDDLE] or [LOW]. [DHV] Horizontal/Vertical Detail Balance Adjust the - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 103
[RGN] R Gain Adjust the intensity of red tones in the range -50 to +50. [GGN] G Gain Adjust the intensity of green tones in the range -50 to +50. [BGN] B Gain Adjust the intensity of blue tones in the range -50 to +50. [RGM] R-G Matrix The R-G matrix changes the tint of the picture along the cyan/ - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 104
or to a memory card. By just reading the custom function file saved on the memory card with another XL H1S / XL H1A, you will instantly get a camcorder configured to operate in the same familiar manner you prefer. Selected custom function file (highlighted in blue) Activate the currently - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 105
you define a custom function file, as long as you do not activate it, the camcorder will function according to default settings. 1. Open the menu, select [CUSTOMIZE] and then select screen. Custom function files saved with a Canon XH G1 or XH A1 cannot be used with this camcorder. 105 Customization - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 106
Video) Custom Function 00 SHCKLSS WB/GN WHITE BALANCE GAIN 01 ZOOM RING CTRL1 02 ZOOM SPEED1 03 FOCUS RING CTRL1 04 BUTTONS OPER.1 MAGN. WB SET 05 BUTTONS OPER.2 REC REVIEW - - 3 - - (OFF) - 1 Only with a lens that supports this function. 2 Only during exposure lock. 3 Only if [LED] is - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 107
GAIN - - (OFF) (OFF) 01 ZOOM RING CTRL REC REVIEW 02 ZOOM SPEED1 03 FOCUS RING CTRL1 - (FAST) - (FAST) - - - - - - - - - - - - - - - - - - - - - 1 Only with a lens that supports this function. 2 Only during exposure lock. List of Custom Functions and Setting Options - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 108
the camcorder will have more trouble focusing Options: [REC REVIEW] (record review) button: [ adjustment when turning the camcorder's rings. Setting Options: the iris limit. With the HD 20x L IS III lens, completely -[CLOSE]- in M Manual mode, Av mode or while recording video (simultaneous recording - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 109
[40%] [ASPECT] Aspect ratio guides: [100%], [40%] [SAFETY] Safety zone guides: [100%], [40%] 11 indicators on the camcorder. When set to [TYPE 1], all LED indicators (including that of the HDV/DV terminal) will the video recording and whether to record on the tape the enlarged image when using the - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 110
icons to display on the screen according to your personal preferences and needs. You can save your personal settings as a custom display file on the camcorder or on the memory card. To activate the on-screen displays at the level that you customized, repeatedly press the EVF DISPLAY button ( 39 - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 111
files saved with a Canon XH G1 or XH A1 cannot be used with this camcorder. List of Custom applicable only when using lenses with iris control. 02 [CAMERA DATA2] Camera Data (2/2) Setting STD] HD Standard Icon Setting Options: [OFF], [ON] 10 [DV REC MODE] Recording Mode in Standard Definition Setting - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 112
12 [TAPE] Tape-Related Icons and Displays Setting Options: [TIME CODE] Time code display: [OFF], [ON] [OPERATION MODE] Icon of the current tape operation: [OFF], [ON] [DV CONTROL] DV control icon: [OFF], [ON] 13 [TAPE REMAINDER] Remaining Time on the Tape You can select to display the tape - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 113
Location of the Custom Displays / 03 02 09 11 12 19 12 00 13 01 20 02 21 06 12 04 14 18 02 18 07 05 14 07 14 10 06 08 19 19 08 03 02 15 16 19 14 00 17 01 20 02 21 06 08 04 06 07 19 07 16 05 02 15 Customization 113 - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 114
picture is distorted, clean the video heads using a Canon DVM-CL video head cleaning cassette or a commercially available digital video head cleaning cassette ( 148 wireless controller. HDV (playback pause) To pause playback, press the during normal playback. button on the camcorder or the PAUSE - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 115
modes. The camcorder stops the tape automatically after 4 minutes 30 seconds in playback pause mode to protect the tape and video heads. During fast forward playback, rewind playback and reverse playback of a tape recorded in HDV standard, the picture may - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 116
function correctly if the time code has not been recorded consecutively. The zero set memory function may not work correctly if you mix recordings in HDV and DV standards on the same tape. Index Search With the index search you can locate any point you have marked beforehand with an index - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 117
. The date search function may not work correctly if you mix recordings in HDV and DV standards on the same tape. Data Code The camcorder maintains a data code containing the recording date and time and other camera data such as shutter speed, gain and exposure (f-stop). Selecting the Data Code - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 118
Mode Two remote sensor modes and an off setting are available to prevent interference from other Canon wireless controllers being used nearby. To change the remote sensor mode of the camcorder Change the custom function [WIRELESS REMOTE] ( 109). To change the remote sensor mode of the wireless - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 119
Capturing a still image in mode [HD] or [SD16:9]: LW 1920x1080 SW 848x480 From a recording made in [HD]: LW 1920x1080 SW 848x480 [SD4:3]: SETUP IMAGE SIZE•••LW 1920x1080 HD IMG SIZE•••LW 1920x1080 Open the menu and select [RECORDING SETUP]. Select [IMAGE SIZE] ([HD IMG SIZE] in mode), select - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 120
continue from the number following that of the last image recorded with the camcorder. If the memory card you insert already contains an image with a the memory card. There will be no duplication of file numbers. This is useful for organizing images on a computer. * * Only when playing back a tape - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 121
while recording video on the tape and capture still images while playing back a tape. Using a lens specially designed for HDV recording is required to be able to record still images. As of March 2008, only the following lenses can be used to record still images: HD 6x L, HD 20x L IS II and HD 20x - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 122
suitable for autofocus, the camcorder locks the focus. In that case, adjust the focus manually with the focus ring. If [CAMERA SETUP] [FOCUS PRI.] button. Simultaneous still images cannot be recorded while a fader is in use. appears if you press the PHOTO button when the custom function [PHOTO - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 123
" " Card Access Display Indicates that the camcorder is writing on the memory card. Reviewing a Still Image right after Recording You can CAMERA SETUP REVIEW 2sec Open the menu and select [CAMERA SETUP]. Select [REVIEW], select a setting option and close the menu. Regardless of the [REVIEW - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 124
Drive Mode Drive mode Continuous Shooting High-Speed Continuous AEB (Auto Exposure Bracketing) Single Use Captures a quick series of still images while you hold the PHOTO button pressed down. For the number of shots per second, refer to the table below. The camcorder records a still image in three - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 125
Metering Mode Metering mode Evaluative Center-weighted average Spot AE Use Appropriate for standard shooting conditions, including backlit scenes. The camcorder divides images into several metering zones. It evaluates the position and brightness of the subject, background, direct light or - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 126
the instruction manual of the Speedlite flash. The following procedures are explained using a Canon 580EX II Speedlite Flash. Connecting a Speedlite Flash When connecting a Canon Speedlite flash you cannot use the Off-Camera Shoe Cord designed for Canon EOS SLR cameras. Always turn off the camcorder - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 127
change the position of the / (card/tape) switch or the dial. - Do not turn off the camcorder, remove the battery pack or disconnect the power supply. Slideshow Press the SLIDESHOW button. • Still images are press the SET button. The selected still image is displayed. Using a Memory Card 127 - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 128
is displayed. Displaying the Recording Data You can select whether to display all the recording data stored when the still image was recorded (histogram, Exif camera information, etc.). Repeatedly press the EVF DISPLAY button to display the recording data. 128 - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 129
image operations menu. In mode, the menu appears when you press the SET button while you are reviewing a still image, or immediately after recording a still image. 3. Select [IMAGE ERASE]. 4. Select close the menu. All still images except the protected ones are erased. Using a Memory Card 129 - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 130
button to open the still image operations menu. In mode, the menu appears when you press the SET button while you are reviewing a still image, or immediately after recording a still image. 3. Select [ PROTECT]. 4. Select [ON]. To remove the protection select [OFF] instead. 5. Select [ CLOSE - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 131
complete initialization may take up to a few minutes. If you use a memory card other than the supplied one, initialize it with the camcorder. MENU ( 33) CARD OPERATIONS INITIALIZE 1. Open the menu and will be erased and the memory card can be used without any problem. Using a Memory Card 131 - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 132
select still images for printing and set the number of copies. These print order settings are compatible with the Digital Print Order Format (DPOF) standards and can be used for printing on DPOFcompatible printers. A maximum of 998 still images can be selected. Selecting Still Images for Printing - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 133
1 Not available when recording in standard definition (SD) with the frame rate set to 24F. 2 only. - 52 - 52 - 52 - 93 - 54 - 114 87 86 86 - 94 - 87 - 85 [HD DOWN-CONV]: Selects whether to down-convert the video signal output from the HDV/DV terminal while playing back a tape - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 134
to 203.9Hz) - - FB AF ADJUST, MF ADJUST, SET DEFAULT - FOCUS PRI. ON, OFF - - REVIEW OFF, 2sec, 4sec, 6sec, 8sec, 10sec - - FOCUS LIMIT ON , OFF - 1 Available only when recording in standard definition (SD) with the frame rate set to 24F. - 51 - 70 - 76 - 77 - 74 - 47 - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 135
camcorder, a tape that was recorded in LP mode with another digital HIGH XLR 1 TRIM +12dB, +6dB, 0dB, -6dB, -12dB XLR 2 TRIM OUTPUT LEVEL 1Vrms, 2Vrms XLR ALC LINK LINK, SEP AUD.LIMITER ON, OFF 1 Available only when recording in standard definition for the [CAMERA SETUP] [REVIEW] setting (or - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 136
AUDIO LEVEL ON, OFF - GUIDE INFO OFF, CUSTOM KEYS, D/T DISPLAY - CUSTOM KEY ON, OFF - - DATA CODE DATE, TIME, DATE & TIME, CAMERA DATA, - - CAM.& D/T [ASPECT GUIDE]: Use the aspect ratio guides as a reference to accurately frame subjects. You can select to display the aspect guides for - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 137
, DISABLE - RESET ALL NO, YES CAM.F.VER. Current version of the camcorder's firmware. - - - LENS F.VER. Current version of the lens' Menu item Submenu item CUSTOM PRESET EDIT - CAMERA CARD CARD CAMERA RETURN META DATA CP CARD CAMERA - - - CUSTOM FUNCTION1 RETURN C.Fn1 C. - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 138
EDIT Action SELECT CP TUNE CAMERA CARD RENAME PROTECT RESET SELECT CP CARD CAMERA SAVE POSITION EXECUTE IMPORT SELECT PRESET_D, 5 PRESET_E, 6 PRESET_F, 7 VIDEO.C, 8 CINE.V, 9 CINE.F [GAM] GAMMA* NORMAL, CINE1, CINE2 [KNE] KNEE AUTO, LOW, MIDDLE, HIGH [BLK] BLACK STRETCH, MIDDLE, PRESS [ - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 139
„ Custom Function Submenu (CUSTOMIZE CUSTOM FUNCTION) Submenu item C.Fn1, C.Fn2, C.Fn3 Action APPLY THIS SET TUNE SAVE TO CARD READ FROM CARD RESET (Custom Function and) Setting Options DISABLED, ACTIVE 00 SHCKLESS WB/GN 00 (00 to 03) 01 ZOOM RING CTRL 00 NORMAL, 01 SLOW, 02 FAST 02 ZOOM - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 140
Action TUNE SAVE TO CARD READ FROM CARD RESET (Custom Display and) Setting Options 00 REC PROGRAMS 00 OFF, 01 ON 01 CAMERA DATA1 03 (00 to 03) 02 CAMERA DATA2 07 (00 to 07) 03 ZOOM 00 OFF, 01 ON(NORMAL), 02 ON(ALWAYS) 04 FOCUS 00 OFF, 01 ON(NORMAL - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 141
different circumstances like turning off the camcorder, setting it to standby or changing mode Aperture, shutter speed setting in M Manual mode Custom white balance Exposure lock Aperture, shutter Iris limit Power Off STANDBY Mode Changing between HD and SD* Returns to off Reset Reset Reset - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 142
) Custom preset file ( 96) Superimposed character recording ( 109) Center marker ( 136) Button/dial used is locked Gain ( 70) Custom function ( 104) Still image size/quality (simultaneous recording) ( 119) Manual focus ( 45) Focus limit ( 48) Custom keys ( 79)/ Date and time ( 34) Focus - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 143
Aperture ( 65, 68) Shutter speed ( 65, 67) White balance ( 71) Additional Information Side panel Video signal standard Time code setting Video output signal from the HD/SD SDI Terminal Manual audio adjustment Time code Tape has reached the end Remaining battery charge Time code synchronization - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 144
flashes in red, turn the camcorder off, remove the card and THE HDV/DV INPUT DV cable is not connected, or the connected digital device is HD INCOMPATIBLE LENS You mounted a lens that does not support HDV recording. HEADS DIRTY, USE CLEANING CASSETTE Video heads are dirty. Clean the video - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 145
Handling Precautions Do not carry the camcorder by the viewfinder, the microphone or its cable. Do not leave the camcorder in places subject to high temperatures, such as a sun-heated car, and high humidity. Do not use the camcorder in places subject to strong electromagnetic fields such - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 146
Attach the terminal cover whenever a battery pack is not in use. Contact with metallic objects may cause a short circuit and damage the battery pack. Dirty terminals may cause a poor contact between the battery pack and the camcorder. Wipe the terminals with a soft cloth. Since storing a charged - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 147
the camcorder after use. Do not use spliced tapes or nonstandard cassettes as they may damage the camcorder. Do not use tapes that have been jammed as video heads or exposure to static electricity. Canon makes no warranties for corrupted or lost data. Do not use memory cards in places subject to - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 148
the Canon DVM-CL Digital Video Head Cleaning Cassette or a commercially available dry cleaning cassette. Tapes already recorded with dirty video heads may not be played back correctly even after cleaning the video heads. Do not use wet type cleaning cassettes as this may damage the camcorder. If - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 149
, wait for 1 more hour before resuming use. Using the Camcorder Abroad Power Sources You can use the compact power adapter to operate the camcorder and to charge battery packs in any country with power supply between 100 and 240 V AC, 50/60 Hz. Consult a Canon Service Center for information on plug - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 150
Troubleshooting If you have a problem with your camcorder, refer to this checklist. Consult your dealer or a Canon Service Center if the problem persists. Power Source Problem Cause Solution Camcorder does not work on that subject. Focus manually. 45 Viewfinder is not adjusted. Adjust the - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 151
. Memory Card Operations Solution Set the camcorder to mode. 114 Load a cassette. 31 Clean the video heads. 148 Stop playback/dubbing. - Verify that the video cable is connected - properly. Clean the video heads with a dry cleaning 148 cassette. Problem Memory card cannot be inserted - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 152
Battery Pack CA-920 Compact Power Adapter CH-910 Dual Battery Charger/Holder BP-930, BP-945, BP-950G, BP-970G Battery Pack External Monitor Cable DTC-1000 Component Video Cable S-Video Cable Stereo Cable External Monitor TV VCR CV-250F DV Cable Digital Device 152 - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 153
1 Can be attached to the HD 20x L IS III, HD 20x L IS II, HD 6x L, 20x L IS, 16x IS II and 16x manual zoom lenses (only for recording in SD mode). 2 EF-S lenses cannot be used. 3 When you use the FU-1000 Monochrome CRT Viewfinder with this camcorder you can use the compact power adapter or the - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 154
during transportation and storage. 16x Manual Zoom Lens XL 5.4-86.4 mm A high-resolution zoom lens with two zoom modes (manual and powered), built-in ND filter and AE functions. Extender XL 1.6x Attach this extender between a Canon XL lens and the camcorder to boost the focal length of the - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 155
Canon EF lenses to the camcorder. The difference in size between the camcorder's 1/3-inch CCD's and 35 mm film means that the effective focal length of still camera lenses is multiplied by 8.8x (4:3)/7.2x (16:9). • Consult your local service outlet to make sure there are no compatibility problems - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 156
have complete control of the main operations of the camcorder while reviewing the on-screen picture without touching the camcorder. This mark identifies genuine Canon video accessories. When you use Canon video equipment, we recommend Canon-brand accessories or products bearing the same mark. 156 - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 157
XL H1S / XL H1A System Video Recording digital component recording HDV High Definition Video 1080i DV Consumer digital VCR SD system HDV MPEG-1 audio layer 2, 16 bit (48 kHz), Transfer rate: 384 kbps (2CH) DV PCM digital sound, 16 bit (48 kHz) or 12 bit (32 kHz) HD High Definition Video (HDV - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 158
attached: 2,560 g (5.6 lb.) 2,500 g (5.5 lb.) Lens The lens' angle of view may change when it is mounted on the XL H1S / XL H1A. Refer to the following table. HD 20x L IS II Lens HD 20x L IS III Lens Angle of View Wide Angle 51° 36´ x 30° 29´ (16:9) 39° 51´ x 30° 29´ (4:3) Telephoto - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 159
VA (100 V AC) - 40 VA (240 V AC) 0 - 40 °C (32 - 104 °F) 75 x 99 x 51 mm (3.0 x 3.9 x 2.0 in.) 215 g (7.6 oz.) excluding the power cable Battery type Rated voltage Operating temperature Battery capacity Dimensions Weight Rechargeable lithium ion battery 7.4 V DC 0 - 40 °C (32 - 104 °F) 5,200 mAh - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 160
using the camcorder 149 Accessories 10, 154 AE shift 69 AEB - Auto exposure bracketing 124 Analog line-in 93 Analog/digital (A/D) converter 94 Aperture 65, 68 Aspect guides adapter 17 COMPONENT OUT terminal 87 Condensation 149 Connection to a computer 95 Connection to a High Definition TV - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 161
Remaining battery 38 Remaining tape 38 Remote sensor 30 RESET 150 Reviewing still images (Review 123 S Safety zone 136 Screen displays 142 SD/SDHC memory card 52 Troubleshooting 150 Tv (programmed AE mode 67 U User bit 56 V VCR Stop 37 Video heads, cleaning 148 Video output standards - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 162
the instruction manual; ii) the use of accessories, attachments, products, supplies, parts or devices with the Equipment that do not conform to Canon specifications or that cause abnormally frequent service problems; iii) repairs or services performed by any party other than a Canon Service Facility - Canon 2080B001 | XL H1S / XL H1A Instruction Manual - Page 163
LATIN AMERICA, INC. 703 Waterford Way, Suite 400, Miami, FL 33126 USA ASIA CANON HONGKONG COMPANY LTD. 19/F, The Metropolis Tower, 10 Metropolis Drive, Hunghom, Kowloon, Hong Kong The information in this manual is verified as of March 2008. Les informations contenues dans ce manuel ont été verifi
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94
-
95
-
96
-
97
-
98
-
99
-
100
-
101
-
102
-
103
-
104
-
105
-
106
-
107
-
108
-
109
-
110
-
111
-
112
-
113
-
114
-
115
-
116
-
117
-
118
-
119
-
120
-
121
-
122
-
123
-
124
-
125
-
126
-
127
-
128
-
129
-
130
-
131
-
132
-
133
-
134
-
135
-
136
-
137
-
138
-
139
-
140
-
141
-
142
-
143
-
144
-
145
-
146
-
147
-
148
-
149
-
150
-
151
-
152
-
153
-
154
-
155
-
156
-
157
-
158
-
159
-
160
-
161
-
162
-
163
 |
 |
HD Video Camera Recorder
Instruction Manual
Caméscope et lecteur vidéo HD
Manuel d'instruction
Videocámara y grabadora HD
Manual de Instrucciones
PUB. DIM-870
English
Français
Español