Canon 2080B001 XL H1S / XL H1A Instruction Manual - Page 57
Audio Recording, Selecting the DV Audio Mode, Using the Wind Screen
UPC - 013803079685
View all Canon 2080B001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Audio Recording When recording on the tape in either HDV or DV standard, audio is recorded on two channels. HDV The audio transfer rate is 384 kbps and the sampling frequency is 48 kHz. DV You can record audio in 16-bit mode (sampling frequency 48 kHz), or 12-bit mode (sampling frequency 32 kHz). • Audio is recorded on channels 1 and 2, leaving the other channels unused. • Audio cannot be dubbed using this camcorder. • Audio recorded with this camcorder is locked audio except for audio recorded from an analog input, or from a digital input if you select the Unlock mode. • While recording, the sampling frequency of the output signal from the HD/SD SDI terminal will be 48 kHz regardless of the audio input. SD Selecting the DV Audio Mode MENU ( 33) AUDIO SETUP DV AUDIO•••16bit Open the menu and select [AUDIO SETUP]. Select [DV AUDIO], select a setting option and close the menu. Using the Wind Screen With the supplied microphone (only), you can reduce the sound of wind recorded from the front microphone. MENU ( 33) AUDIO SETUP WIND SCREEN•••OFF Open the menu and select [AUDIO SETUP]. Select [WIND SCREEN], set it to [ON ] and close the menu. Selecting the Sensitivity of the Front Microphone You can change the sensitivity of the front microphone to [NORMAL] or [HIGH] (+6 dB) to match the recording conditions. [NORMAL]: To record audio under usual conditions. [HIGH]: To record audio at a higher volume. MENU ( 33) AUDIO SETUP MIC SENSIT.•••NORMAL Open the menu and select [AUDIO SETUP]. Select [MIC SENSIT.], select a setting option and close the menu. Recording 57