Canon 2080B001 XL H1S / XL H1A Instruction Manual - Page 89
Connection to a Standard Definition TV or Monitor, Using the COMPONENT OUT Terminal
UPC - 013803079685
View all Canon 2080B001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
Connection to a Standard Definition TV or Monitor 1 Using the COMPONENT OUT Terminal • Refer to the connection diagram in the previous section ( 87). • Select the appropriate component video signal depending on the TV or monitor you connect. Open the menu and select [SIGNAL SETUP]. Select [COMP.OUT], select a setting option and close the menu. 2 Using the VIDEO IN/OUT or (S-Video) IN/OUT Terminal • Refer to the connection diagram in the previous section ( 88). • If connecting to a TV set with a 4:3 aspect ratio, change the [LETTERBOX] setting appropriately. Open the menu and select [SIGNAL SETUP]. Select [LETTERBOX], set it to [ON] and close the menu. We recommend powering the camcorder from a household power outlet. TV sets with S1-Video terminals: Recordings made with a 16:9 aspect ratio ( 40) will be played automatically in widescreen mode if you connect the camcorder to the TV using the S-VIDEO terminal. TV sets equipped with the Video ID-1 System: Recordings made with a 16:9 aspect ratio ( 40) will be played automatically in widescreen mode whether you connect the camcorder to the TV using the S (S1-) VIDEO terminal or the VIDEO terminal. During fast forward playback, rewind playback and reverse playback of a tape recorded in HDV standard, the picture may be distorted. 89 External Connections