Canon 4207B002 User Manual - Page 142

Scan Settings Dialog Box Page 142 of 334 pages On-screen Manual > Scanning Guide > MP Navigator EX Screens > Scan Settings Dialog Box Scan Settings Dialog Box The Scan Settings dialog box opens when you click Specify... in a dialog box of the One-click Mode screen. In the Scan Settings dialog box, you can make advanced settings for scanning with one-click or scanning using the buttons on the machine (Scanner Buttons). Note The displayed items vary by document type and how the screen was opened. Document Type Select the type of document to be scanned. When Auto Mode is selected, the document type is automatically detected. In that case, Color Mode, Document Size, etc. are automatically set as well. When Film(Auto mode) is selected, the film type (negative or positive) is automatically detected. Important Film may not be scanned correctly when Auto Mode or Film(Auto mode) is selected. In that case, select the type of film and scan again. To scan correctly, select a document type that matches the document to be scanned. Place documents correctly according to the type of document to be scanned. Otherwise, documents may not be scanned correctly. See "Placing Documents " for details on how to place documents. Color Mode Select how to scan the document. Color This mode renders the image in 256 levels (8 bit) of R(ed), G(reen), and B(lue). Grayscale This mode renders the image in 256 levels (8 bit) of black and white. Important Grayscale cannot be selected when Film(Auto mode) is selected for Document Type. Black and White