Canon 4207B002 User Manual - Page 266

Scanning from an Application Page 266 of 334 pages Scanning from a WIA driver 1.0-compliant application The following is an example of scanning using Paint. 1. Place the document on the Platen. Placing Documents 2. Click From Scanner or Camera... on the File menu. (In Windows 7, click From scanner or camera from application.) .) (Select the command to scan a document in the 3. Select an image type according to the document to be scanned. Note To scan with the values previously set in Adjust the quality of the scanned picture, select Custom Settings. 4. Click Adjust the quality of the scanned picture and set the preferences as required. Brightness Move the slider to adjust the brightness. Move it to the left to darken and right to brighten the image. You can also enter a value (-127 to 127). Contrast Move the slider to adjust the contrast. Moving it to the left will decrease the contrast of the image, thus softening the image. Moving it to the right will increase the contrast of the image, thus sharpening the image. You can also enter a value (-127 to 127). Resolution (DPI) Enter the resolution. Specify a value between 50 dpi and 600 dpi. Resolution Picture type Select the type of scan you want for your document.