Canon 4207B002 User Manual - Page 168

Print Dialog Box Page 168 of 334 pages - Long narrow documents such as panoramic photos Reflective CD/DVD labels may not be scanned properly. Film may not be scanned correctly when Auto Mode or Film(Auto mode) is selected. In that case, select the type of film and scan again. Note To reduce moire, set Document Type to Magazine. Color Mode Select how to scan the document. Document Size Select the size of the document to be scanned. When you select Custom, a screen in which you can specify the document size appears. Select a Units, then enter the Width and Height and click OK. Important When you select Auto Detect, the image may not be scanned at the correct position and size. In that case, change the size to the actual document size (A4, Letter, etc.) and align a corner of the document with the corner at the arrow (alignment mark) of the Platen. Resolution Select the resolution at which to scan documents. The following scanning resolutions can be specified: When Document Type is other than film: 150 dpi / 300 dpi / 600 dpi When Document Type is film: 300 dpi / 400 dpi / 600 dpi / 1200 dpi / 2400 dpi / 4800 dpi Resolution Brightness Adjust the image brightness. Move the slider to the left to darken and right to brighten the image. Important This function is available only when Document Type is Magazine or Document. This function is not available when Document Size is set to be detected automatically. This function is not available when the Easy Color Matching checkbox is selected. Use the scanner driver Select this checkbox to display the ScanGear (scanner driver) screen and make advanced scan settings. Color Mode, Document Size, Resolution and other settings in the Print dialog box will be disabled. Specify these settings in the ScanGear screen. Important This function is not available when the Easy Color Matching checkbox is selected. Specify... Opens the Scan Settings dialog box in which you can make advanced scan settings. Scan Settings Dialog Box Printer Settings Printer