Canon 9540A003 OPTURA500 OPTURA400 Instruction Manual - Page 130

Trimming Settings

Page 130 highlights

Trimming Settings Set the print style before you start with the trimming settings. 1. In the print setting menu, turn the SET dial to select [TRIMMING] and press the SET dial. The trimming frame appears. 2. Change the size of the trimming frame. W • Move the zoom lever toward T to shrink the frame, and T toward W to enlarge the frame. • To cancel the trimming settings, move the zoom lever toward W until the trimming frame disappears. 3. Move the trimming frame. T • Turn the SET dial to move the frame. Press the SET dial to switch between the directions (up/down or right/left) and the orientation of the frame (vertical/horizontal). • Pressing the MENU button brings you back to the print settings menu. ❍ About the color of the trimming frame (Canon CP-Printers only): - White: No trimming settings. - Green: Recommended trimming size. (The trimming frame may not appear in green depending on the image size, paper size or borders settings.) - Red: The image is magnified beyond recommended size. The image will be printed coarsely. ❍ The trimming setting applies only to one image. ❍ The trimming setting is canceled with the following operations: - When you turn off the camcorder. - When you disconnect the interface cable. - When you expand the trimming frame beyond its maximum size. 130

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166

130
Trimming Settings
Set the print style before you start with the trimming settings.
1. In the print setting menu, turn the SET dial to select
[TRIMMING] and press the SET dial.
The trimming frame appears.
2. Change the size of the trimming frame.
• Move the zoom lever toward
T
to shrink the frame, and
toward
W
to enlarge the frame.
• To cancel the trimming settings, move the zoom lever toward
W
until the trimming frame disappears.
3. Move the trimming frame.
• Turn the SET dial to move the frame. Press the SET dial to
switch between the directions (up/down or right/left) and the
orientation of the frame (vertical/horizontal).
• Pressing the MENU button brings you back to the print
settings menu.
About the color of the trimming frame (Canon CP-Printers only):
-
White: No trimming settings.
-
Green: Recommended trimming size. (The trimming frame may not appear
in green depending on the image size, paper size or borders settings.)
-
Red: The image is magnified beyond recommended size. The image will be
printed coarsely.
The trimming setting applies only to one image.
The trimming setting is canceled with the following operations:
-
When you turn off the camcorder.
-
When you disconnect the interface cable.
-
When you expand the trimming frame beyond its maximum size.
W
T
T