Canon 9540A003 OPTURA500 OPTURA400 Instruction Manual - Page 79
Other Camcorder Settings
UPC - 013803040937
View all Canon 9540A003 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Other Camcorder Settings Beep E You will hear a beep upon camcorder operations such as power on/off, start/stop, self- timer countdown, and unusual conditions of the camcorder. If you turn off the beep, all camcorder sounds including the ones of the My Camera settings will be turned off. CAMERA PLAY (VCR) CARD CAMERA CARD PLAY ( 36) SYSTEM BEEP ON To turn the beep off, open the menu and select [SYSTEM]. Select [BEEP], set it to [OFF] and close the menu. Advanced Functions Other Functions Turning Off the Tally Lamp The tally lamp indicates that the camcorder is recording, receiving signals from the wireless controller or counting down for the self-timer. However, the flashing may be reflected in the lens when recording close-ups or through glass, and you may therefore decide to turn it off. CAMERA PLAY (VCR) CARD CAMERA CARD PLAY ( 36) SYSTEM TALLY LAMP•••ON Open the menu and select [SYSTEM]. Select [TALLY LAMP], set it to [OFF] and close the menu. The tally lamp still lights up when the camcorder receives a signal from the wireless controller, or during self-timer countdown. Adjusting the Brightness of the LCD Screen CAMERA PLAY (VCR) CARD CAMERA CARD PLAY ( 36) DISPLAY SETUP/ BRIGHTNESS•••- + Open the menu and select [DISPLAY SETUP/ ]. Select [BRIGHTNESS], adjust the brightness level and close the menu. Changing the brightness of the LCD screen does not affect that of the viewfinder or the recordings. 79