Canon 9540A003 OPTURA500 OPTURA400 Instruction Manual - Page 90
Playing Back the Added Sound
UPC - 013803040937
View all Canon 9540A003 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
Playing Back the Added Sound You can select to play back Stereo 1 (original sound), Stereo 2 (added sound), or adjust the balance of both sounds. CAMERA PLAY (VCR) CARD CAMERA CARD PLAY ( 36) AUDIO SETUP 12bit AUDIO•••STEREO1 1. Open the menu and select [AUDIO SETUP]. Select [12bit AUDIO], select a setting and close the menu. • STEREO1: Plays back the original sound. • STEREO2: Plays back the added sound. • MIX/FIXED: Plays back stereo 1 and stereo 2 in the same level. • MIX/VARI.: Plays back stereo 1 and stereo 2. The mix balance can be adjusted. 2. If you have selected [MIX/VARI.], adjust the mix level: Open the menu and select [AUDIO SETUP]. Select [MIX BALANCE], adjust the balance with the SET dial and close the menu. Turn the SET dial down to increase the volume of Stereo 1 and up to increase the volume of Stereo 2. ❍ The camcorder resets to [STEREO1] when you turn the camcorder off. However, the mix balance is memorized by the camcorder. ❍ You can also press the 12bit AUDIO OUT button on the wireless controller to select the audio output. However, the mix balance can only be adjusted in the menu. 90