Canon 9540A003 OPTURA500 OPTURA400 Instruction Manual - Page 92
Transferring Using a USB Cable
UPC - 013803040937
View all Canon 9540A003 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
Transferring Using a USB Cable Windows XP/Hi-Speed USB 2.0 Only Use a video editing software to transfer video recordings from the tape to the computer, edit them and upload them from the computer to the tape. You can also convert analog signals to digital signals and transfer them to the computer. For details, refer to the DV Network Software Instruction Manual. CAMERA PLAY (VCR) CARD CAMERA CARD PLAY 1. Install the Canon USB Video Driver supplied with the DV Network Software. See Installing Only the Canon USB Video Driver in the DV Network Software Instruction Manual. 2. Connect the power adapter to the camcorder. 3. Set the camcorder to PLAY (VCR) mode. When transferring video recordings from/to a tape, make sure that "AV \DV" is not displayed. When using the analog-digital converter, make sure that "AV \DV" is displayed. Change the settings as necessary ( 87). 4. Connect the camcorder to the computer using the USB cable. Make sure that camcorder and computer are not connected with a DV cable before connecting the camcorder to the computer using the USB cable. Otherwise, the computer may not operate properly. 92