Canon A400 PowerShot A400 Camera User Guide - Page 25
Basic Functions
UPC - 013803043846
View all Canon A400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Basic Functions Turning the Power On/Off Turning the Power On 1 Press the ON/OFF button until the upper indicator next to the viewfinder lights green. Shooting Mode z Current shooting settings will appear in the LCD monitor. z Current shooting settings will disappear in about 6 seconds when the LCD monitor is set to Standard (No information) or No Display(p. 26). z If you turn the mode switch to , the lens will retract after approximately 1 minute. Playback Mode z The LCD monitor displays an image. Turning the Power Off z Press the ON/OFF button again to turn the power off. z If the "Card locked!" message appears right after the power is turned on, the SD card cannot record (p. 15). z You will hear a start-up sound and see the start-up image when the power comes on. (To change the start-up sound and image, see below and p. 71 and 106.) z The start-up image does not appear when the LCD monitor is off in Shooting mode or the A/V OUT terminal is connected to a TV. Turning on the camera without the start-up sound and image Press and hold the SET button, then turn on the power. 23