Canon Color imageCLASS LBP712Cdn imageCLASS LBP712Cdn User Guide - Page 203
Click [OK]., Perform a hard reset., Use IPv6], Use Stateless Address], Use Manual Address]
View all Canon Color imageCLASS LBP712Cdn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 203 highlights
Network [Use IPv6] Select the check box to enable IPv6 on the machine. When not using IPv6, clear the check box. [Use Stateless Address] Select the check box when using a stateless address. When not using a stateless address, clear the check box. [Use Manual Address] When you want to manually enter an IPv6 address, select the check box and enter the IP address, prefix length, and default router address in the corresponding text boxes. [IP Address] Enter an IPv6 address. You cannot enter an address that starts with "ff" (or multicast address), the address of "0000::0000" (all zeros), or an address that starts with "0:0:0:0:0:ffff" or "0:0:0:0:0:0." [Prefix Length] Enter a number that indicates how many bits are available for the network address. [Default Router Address] Specify the IPv6 address of the default router as necessary. You cannot enter an address that starts with "ff" (or multicast address), the address of "0000::0000" (all zeros), or an address that starts with "0:0:0:0:0:ffff" or "0:0:0:0:0:0." [Use DHCPv6] Select the check box when using a stateful address. When not using DHCPv6, clear the check box. 6 Click [OK]. 7 Perform a hard reset. ● Click [Device Control], select [Hard Reset], and then click [Execute]. 197