Canon Color imageCLASS LBP712Cdn imageCLASS LBP712Cdn User Guide - Page 48

Basic Operations ● The factory default settings for paper size and type are and , respectively. If you load a different size or type of paper into the machine, make sure to change the setting. If you do not change the paper size or type setting, the machine cannot print properly. Automatic detection of paper type ● The machine is provided with a function for automatic paper type detection. If this function is enabled, it is not necessary to change paper type settings when you load plain or heavy paper. Auto Detect Ppr Type(P. 505) ● When you want to print a document from an environment not allowing you to make settings for paper size and paper type, such as from a computer running an operating system or a mobile device that does not support any printer driver, set and . Select Feeder Menu(P. 501) Printing on the Back Side of Printed Paper (Manual 2-Sided Printing) You can print on the back side of printed paper. Flatten any curls on the printed paper and insert it into the multi-purpose tray ( Loading Paper in the Multi-Purpose Tray(P. 46) ), with the side to print face down (previously printed side face down). ● When you want to print on the back side of the paper that is already printed, set to in the setting menu of the operation panel. Manual 2-Sided (MP)(P. 507) ● Load one sheet of paper each time you print. ● You can use only the paper printed with this machine. ● You cannot print on the side that has previously been printed on. Loading a Custom Size Paper To load custom size paper or other paper whose size is not found in the paper size markings on the paper drawer, use the following procedure. 1 Pull out the paper drawer until it stops. 2 Slide the paper guides apart. ● Press the lock release lever to slide the paper guides outward. 42