Canon Color imageCLASS LBP712Cdn imageCLASS LBP712Cdn User Guide - Page 42
Performing a Quick Start of the Machine, Configuring Quick Startup Settings
View all Canon Color imageCLASS LBP712Cdn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Basic Operations Performing a Quick Start of the Machine 0YS1-00R If you specify the quick startup settings, you can reduce the time from when the power switch is pressed until the screens become operable. The way of turning OFF the power to perform a quick start of the machine is called "quick turn-OFF." Configuring Quick Startup Settings(P. 36) Turning OFF the Power (Performing a Quick Turn-OFF)(P. 37) Before Configuring Quick Startup Settings When you are using a network If any of the settings below is , the quick start function is disabled. ● RARP, BOOTP, IPv6 Network(P. 185) ● IPSec Configuring IPSec Settings(P. 301) When you are using the MEAP function Check whether the currently installed MEAP applications support the quick start function. Configuring Quick Startup Settings 1 Press ( ). 2 Use / to select , and press . 3 Select , and press . 4 Select , and press . Disables the Quick Start function. Enables the Quick Start function. 5 Perform a hard reset. Performing a Hard Reset(P. 499) ➠ The settings are enabled after the hard reset is performed. 36