Canon EOS-1D Software Instructions EOS DIGITAL SOLUTION DISK Ver.3 for Windows - Page 81

Specifying Camera Settings from Your Computer Personal Function Settings You can specify the Personal Function settings listed below in the different tab sheets. [Exposure Functions 1] P.Fn-01 Disables the shooting modes. (➞6-9) P.Fn-02 Disables the metering modes. (➞6-9) [Exposure Functions 2] P.Fn-03 Specifies the metering mode for manual exposure. (➞6-10) P.Fn-04 Sets the maximum and minimum shutter speeds to be used. (➞6-10) P.Fn-05 Sets the maximum and minimum apertures to be used. (➞6-11) [Exposure Functions 3] P.Fn-06 Registers and switches the shooting mode and metering mode. (➞6-11) P.Fn-07 Repeats bracketing during continuous shooting. (➞6-13) P.Fn-08 Sets the number of shots to be bracketed. (➞6-13) P.Fn-09 Changes the bracketing sequence for C.Fn9-2/3 to increased exposure, stanadrd exposure, and decreased exposure. (➞6-13) P.Fn-10 Retains the shift amount for program shift. (➞6-14) [AF Functions] P.Fn-13 Executes AI Servo AF continuous shooting giving priority to the drive speed. (➞6-15) P.Fn-14 Disables focus detection (search driving) by the lens drive. (➞6-15) P.Fn-15 Disables the AF-assist beam from being emitted. (➞6-15) P.Fn-16 Enables automatic shooting when focus is achieved at the fixed point of focus while the shutter button is pressed fully. (➞6-16) P.Fn-17 Disables automatic AF point selection (➞6-16) P.Fn-18 Enables automatic AF point selection when C.Fn-11-2 has been set. (➞6-17) [Drive Functions] P.Fn-19 Sets the continuous shooting speed. (➞6-17) P.Fn-20 Limits the number of shots during continuous shooting. (➞6-17) P.Fn-21 Enables silent operation when the shutter button is OFF after picture-taking. (➞6-18) [Other Functions 1] P.Fn-23 Changes the timer's time length. (➞6-18) P.Fn-24 Illuminates the LCD panel during bulb exposures. (➞6-19) [Other Functions 2] P.Fn-25 Sets the default settings when the CLEAR (QUALITY+WB) button is ON. (➞6-19) [Other Functions 3] P.Fn-27 Enables the electronic dial's function to be used in the reverse direction. (➞6-20) P.Fn-28 Prevents exposure compensation with the Quick Control Dial. (➞6-20) [Combination] Allows you to check the settings (➞6-21) Allows you to save the settings (➞6-22) Allows you to load the saved settings (➞6-23) * Omission of P.Fn-11, 12, 22 and 26 The numbers and descriptions for P.Fn-0 to P.Fn-28 contain some omissions due to the fact that some functions on the EOS-1V are omitted on the EOS-1D, but the same Personal Function numbers are used on both models. 6-7