Canon EOS 6D Mark II Basic Instruction Manual - Page 145
Acquiring GPS Signals
View all Canon EOS 6D Mark II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 145 highlights
Acquiring GPS Signals To acquire GPS signals, take the camera outside where the sky is unobstructed. Face the top of the camera toward the sky while keeping your hands, etc. away from the camera top. When the signal acquisition conditions are good, it will take the camera approx. 30 sec. to 60 sec. to acquire the GPS satellite signals after you set [GPS] to [Mode 1] or [Mode 2]. Check that [r] is displayed on the LCD panel, then shoot. 1 Select [GPS settings]. Under the [53] tab, select [GPS settings], then press . 2 Select [GPS]. 3 Select the mode. Select [Mode 1] or [Mode 2]. X [r] will be displayed on the LCD panel. Mode 1 The camera will continue to receive GPS signals at regular intervals even when the power switch is set to or . Mode 2 When the power switch is set to , the camera will receive GPS signals. When the power switch is set to , the GPS function will also turn off. However, if auto power off is in effect, the camera will continue to receive GPS signals at regular intervals. 143