Canon EOS 6D Mark II Basic Instruction Manual - Page 36
Charging the Battery
View all Canon EOS 6D Mark II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Charging the Battery 1 Remove the protective cover. Detach the protective cover provided with the battery. LC-E6 LC-E6E 2 Attach the battery. As shown in the illustration, attach the battery securely to the charger. To detach the battery, follow the above procedure in reverse. 3 Recharge the battery. For LC-E6 As shown by the arrow, flip out the battery charger's prongs and insert the prongs into a power outlet. For LC-E6E Connect the power cord to the charger and insert the plug into a power outlet. X Recharging starts automatically and the charge lamp blinks in orange. Charge Level 0-49% 50-74% 75% or higher Fully charged Color Orange Green Charge Lamp Display Blinks once per second Blinks twice per second Blinks three times per second Turned on It takes approx. 2 hr. and 30 min. to fully recharge a completely exhausted battery at room temperature (23°C / 73°F). The time required to recharge the battery will vary greatly depending on the ambient temperature and the battery's remaining capacity. For safety reasons, recharging in low temperatures (5°C - 10°C / 41°F - 50°F) will take longer (up to approx. 4 hr.). 34