Canon FAXPHONE L75 User Guide - Page 118

Receiving Faxes Automatically: FAX ONLY MODE If you have a separate telephone line for fax use only, connect your machine to this line and set FAX ONLY MODE. Your machine will answer all calls as fax calls. Setting FAX ONLY MODE Follow this procedure to set the receive mode to FAX ONLY MODE: 1 Open the one-touch speed dialing panel. 2 Press Data Registration. DATA REGSTRATION 3 Press Set. USER SETTINGS 4 Use ∂ or ¨ to select RX SETTINGS. RX SETTINGS 5 Press Set. ECM RX 6 Use ∂ or ¨ to select RX MODE. RX MODE 7 Press Set. FAX/TEL AUTO SW 8 Use ∂ or ¨ to select FAX ONLY MODE. 9 Press Set. FAX ONLY MODE INCOMING RING 10 Press Stop to return to standby mode. 12/27 FaxOnly 11 Confirm that FaxOnly is displayed in the LCD. • If FaxOnly is not displayed, press Receive Mode repeatedly until FAX ONLY MODE is displayed. After a few seconds, the LCD returns to standby mode. 12/27 FaxOnly The machine treats all incoming calls as fax calls. It receives faxes automatically and disconnects any voice calls. n The machine does not ring when it receives a fax call. If you want to be alerted when a fax call is received, connect the handset or an extension telephone to the machine, and enable the INCOMING RING setting (1 p. 14-7). You can also select the number of rings before the machine answers (1 RING COUNT, p. 14-7). 8-8 Receiving Faxes Chapter 8