Canon FAXPHONE L75 User Guide - Page 124
Special Dialing, Dialing Through a Switchboard, Entering Pauses in a Fax/Telephone Number
View all Canon FAXPHONE L75 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 124 highlights
Special Dialing Dialing Through a Switchboard A PBX (Private Branch Exchange) is an on-site telephone switchboard. If your machine is connected through a PBX or other telephone switching system, you will need to dial the outside line access number first, and then the number of the party you are calling. Entering Pauses in a Fax/Telephone Number You may need to enter pauses in a fax/telephone number in the following situations: - When you dial or register an overseas number. The length and position of the pause depends on the telephone system of your country. - When your machine is connected to a switchboard. Follow this procedure to enter pauses when registering a number for speed dialing: 1 When you come to the step that requires you to enter the fax/telephone number, use the numeric buttons to enter the number up to where a pause is necessary. • To correct a mistake in the number, press ¬ to delete the rightmost digit. Alternatively, press Clear to delete the entire number. TEL=011_ 2 Press Pause to enter a pause. • A pause entered within a number (P) is two seconds long. • For a longer pause, press Pause again for another two-second pause. Alternatively, you can change the length of the pause (1 MID PAUSE SET, p. 14-6). TEL=011P_ 3 Continue entering the rest of the fax/ telephone number with the numeric buttons. • If you enter the wrong number, press Clear and start again from step 1. TEL=011p811234_ 4 To enter a pause at the end of the number, press Pause. • A pause at the end of a number (P) is fixed to ten seconds. TEL=011p811234P 5 Continue with the operation you are performing. 9-2 Special Features Chapter 9