Canon FAXPHONE L75 User Guide - Page 33
Connecting the Power Cord
View all Canon FAXPHONE L75 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Connecting the Power Cord Before connecting the power cord, see Power Supply, p. 1-9. Follow this procedure to connect the power cord: Setting Up Connect the supplied power cord to the power cord connector. Then connect the other end into a properly grounded 120 V AC three-prong outlet. n • The machine is equipped with a three-prong, grounding-type plug provided with a third (grounding) pin. This plug will only fit into a grounding-type outlet. This is a safety feature. If you are unable to insert the plug into your outlet, contact an electrician to replace the outlet. Do not defeat the safety purpose of the grounding-type plug by breaking off the third prong or using a 3-to-2 adapter. • Do not plug the machine into the same circuit as an appliance such as an air conditioner, electric typewriter, television, or copier. Such devices generate electrical noise that can interfere with your machine's ability to send and receive faxes. The machine has no power switch, so its power is on as long as it is plugged in. When you connect the machine, the LCD displays these messages: PLEASE WAIT Machine is warming up. 12/27 FaxTel Machine is in standby mode (date and receive mode displayed) and ready for use. PUT IN CARTRIDGE If the cartridge has not been installed, this message alternates with the standby mode display. Chapter 2 Setting Up 2-9