Canon PowerShot SX110 IS User Manual - Page 195
Batteries
View all Canon PowerShot SX110 IS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 195 highlights
193 z The flash may fire if another flash is being used in close proximity. z The High-Power Flash may not fire outdoors in daylight or when there are no reflective items. z For continuous shooting, although the flash fires for the first shot, it does not fire for subsequent shots. z Fasten the attachment screws securely so that they do not loosen. Failure to do so may lead to the dropping of the camera and flash resulting in damage to both. z Before attaching the bracket to the flash, check that the lithium battery (CR123A or DL123) is installed. z To illuminate the subjects properly, install the flash so that it is up against the side of the camera and parallel with the camera's front panel. z A tripod can be used even when the flash is attached. Batteries z Charge becomes Severely Limited If the battery usage time has considerably diminished, wipe the battery terminals well with a dry cloth. The terminals may be dirty from fingerprints. z Usage in Cold Temperatures Get a spare generic lithium battery (CR123A or DL123). You are recommended to place the spare battery in your pocket to warm it up before switching it for the battery in the flash. z Non-Use over Extended Periods Leaving batteries in the High-Power Flash could allow the battery fluid to leak, damaging the product. Remove the batteries from the HighPower Flash and store them in a cool, dry place. Appendix