Canon PowerShot SX50 HS User Guide - Page 253

On-Screen Messages Invalid selection range • When specifying a range for image selection (=176, 181, 187, 241), you attempted to choose an initial image that was after the final image, or vice-versa. Exceeded selection limit • More than 998 images were selected for Print List (=238). Choose 998 images or less. • More than 998 images were selected for Print List (=238) or Photobook Set-up (=243). Choose 998 images or less. • Print List (=238) or Photobook Set-up (=243) settings could not be saved correctly. Reduce the number of selected images and try again. • You attempted to choose more than 500 images in Protect (=175), Erase (=179), Favorites (=184), My Category (=185), Print List (=238), or Photobook Set-up (=243). Communication error • An excessive amount of images (approx. 1,000) on the memory card prevented printing or image transfer to a computer. To transfer the images, use a commercially available USB card reader. To print, insert the memory card directly into the printer card slot. Naming error! • The folder could not be created or images could not be recorded, because the highest supported folder number (999) for storing images on the card has been reached and the highest supported image number (9999) for images in folders has been reached. In the [3] menu, change [File Numbering] to [Auto Reset] (=205), or format the memory card (=203). Lens Error • This error may occur if the lens is held while it is moving, or when the camera is used in dusty or sandy locations. • Frequent display of this error message may indicate camera damage. In this case, contact a Canon Customer Support Help Desk. A camera error was detected (error number) • If this error message is displayed immediately after a shot, the image may not have been saved. Switch to Playback mode to check for the image. • Frequent display of this error message may indicate camera damage. In this case, write down the error number (Exx) and contact a Canon Customer Support Help Desk. File Error • Correct printing (=231) may not be possible for photos from other cameras or images that have been altered using computer software, even if the camera is connected to the printer. 253