Canon PowerShot SX710 HS User Guide - Page 65

Locking or Changing Image Brightness before Recording Still Images Movies You can lock the exposure before or during recording or adjust it in 1/3stop increments within a range of -2 to +2 stops. 1 Lock the exposure. ●●Press the [ ] button to lock the exposure. The exposure shift bar is displayed. ●●To unlock the exposure, press the [ ] button again. 2 Adjust the exposure. ●●Turn the [ ] dial to adjust the exposure, as you watch the screen. 3 Shoot (=64). Correcting Severe Camera Shake Still Images Movies Counteract severe camera shake, as when recording movies while moving. The portion of images displayed changes more than for [Standard], and subjects are further enlarged. ●●Follow the steps in "Recording Movies with Subjects at the Same Size Shown before Recording" (=52) to choose [High]. ●● [Dynamic IS] is not available when [IS Mode] is set to [Off] (= 51). ●● Only [Standard] is available when the movie quality is set to [ ]. Recording Movies in Short Clip Mode Still Images Movies Apply playback effects to brief clips of a few seconds, such as fast motion, slow motion, or replay. Clips recorded in this mode may be included in Story Highlights albums (=103). 1 Enter [ ] mode. ●●Set the mode dial to [ ]. ●●Press the [ ] button, choose [ ] in the menu, and then choose [ ] (=27). ●●Black bars displayed on the top and bottom edges of the screen indicate image areas not recorded. 2 Specify the shooting time and playback effect. ●●Press the [ ] button. ●●Turn the [ ] dial to set the shooting time (4 - 6 sec.), and press the [ ][ ] buttons to set the playback effect, as described below. 3 Shoot (=64). ●●A bar showing the elapsed time is displayed. Before Use Basic Guide Advanced Guide Camera Basics Auto Mode / Hybrid Auto Mode Other Shooting Modes P Mode Tv, Av, and M Mode Playback Mode Wi-Fi Functions Setting Menu Accessories Appendix Index 65