Canon SELPHY CP400 Compact Photo Printer SELPHY CP400 User Guide - Page 30

Connecting a Power Source and the Camera to the Printer Connect the camera to the printer using the cable (included with the camera) and turn the printer's power on. For more detailed camera connection instructions, refer to your Camera User Guide or Direct Print User Guide. Camera* To DIGITAL terminal 5 To DC IN terminal 1 4 15 cm (6 in.) at the front and back of the devices and 10 cm (4 in.) on both sides or more of open space 2 Compact power adapter Interface cable included with the camera To power outlet 6 3 Camera's Compact Power Adapter (sold separately or included with the camera) • Please use the camera's compact power adapter or a fully charged battery pack (or charged batteries). To power outlet * Canon cameras compatible with CP400, and non-Canon cameras compatible with PictBridge can also be connected. The numbered steps in the following instructions refer to the numbers in the above illustration. 1 Place the printer on a flat area. • Be sure to leave about 15 cm (6 in.) of clearance around the paper-handling slot (at the rear) so that paper has sufficient room to jut out from the slot during printing. 2 Connect the supplied power cord to the supplied Compact Power Adapter CA-CP200. 3 Insert the plug in a power outlet. 29