Canon VB-M740E Network Video Recording Software RM Series Administrator Manual - Page 159
Changing the Storage Server IP Address
View all Canon VB-M740E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 159 highlights
Appendix Changing the Storage Server IP Address When the IP address of a computer on which a Storage Server is installed changes, the IP address of the Storage Server must also be changed in some cases. If "IP Address Configuration Error" appears for [Status] in the [Storage Server Search Results] tab of the lower section of RM Manager, change the IP address of the Storage Server as follows. Changing the Storage Server IP Address with RM Manager 1 Launch RM Manager. 2 Click [Tools] > [Change IP Address]. Or select the Storage Server in the [Storage Server Search Results] tab, and select [Change IP Address] in the right-click menu. 3 Enter the Storage Server's changed IP address, user name, and password, and then click [OK]. Change the Storage Server IP Address with the Command Line 1 Select [RM Storage Server] from [Control Panel] > [System and Security] > [Administrative Tools] > [Service] and stop the service. 2 Open the command prompt using [Run as administrator], enter command line option (-resethost=IP address) and execute. Example: 64-bit OS "C:\Program Files (x86)\Canon\WebView\NVR30\storage_server.exe" -resethost=XXX.XXX.XXX.XXX Example: 32-bit OS "C:\Program Files\Canon\WebView\NVR30\storage_server.exe"-resethost=XXX.XXX.XXX.XXX (Enter the IP address the computer changed to in "XXX.XXX.XXX.XXX".) 3 Select [RM Storage Server] from [Control Panel] > [System and Security] > [Administrative Tools] > [Service] and start the service again. • To stop or start the service from the control panel, select [RM-Lite Storage Server]. • When executing the command, enter "storage_server_rm_lite.exe". 159