Canon Wireless File Transmitter WFT-E2 II A WFT-E2 II Instruction Manual for U
Canon Wireless File Transmitter WFT-E2 II A Manual
View all Canon Wireless File Transmitter WFT-E2 II A manuals
Add to My Manuals
Save this manual to your list of manuals |
Canon Wireless File Transmitter WFT-E2 II A manual content summary:
- Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 1
Wireless File Transmitter WFT-E2 II Instruction Manual for Use With EOS-1D Mark IV To EOS-1D Mark III or EOS-1Ds Mark III Users This instruction manual describes the use of the transmitter when connected to the EOS-1D Mark IV. When using the transmitter with the EOS-1D Mark III or EOS-1Ds Mark III, - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 2
Introduction The Wireless File Transmitter WFT-E2 II is an accessory for EOS-1D Mark IV camera. It gives the camera wireless and wired LAN functionality and adds a USB port, enabling the following operations. Wireless and Wired LAN Functions FTP Transfer Transfer images to an FTP server EOS Utility - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 3
Functions When Connected via USB External Media Introduction Record or backup images onto external media GPS Connected by a USB cable Connected via Bluetooth Add the latitude, longitude, altitude, date and time, and other shooting information to images 3 - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 4
in this manual are trademarks or registered trademarks of their respective owners. Using the transmitter for remote image transfer, capture, or viewing requires adequate knowledge of configuring your wireless or wired LAN and FTP server. Canon cannot provide support for configuring wireless or wired - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 5
Settings 15 2 Transferring Images to an FTP Server 29 3 Remote Capture Using EOS Utility 43 4 Remote Capture Using WFT Server 49 5 Linked Shooting 61 6 Managing Settings Information 65 7 Using External Media 71 8 Using GPS Devices 83 9 Troubleshooting 91 10 Reference 109 5 - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 6
Nomenclature...11 Attaching to the Camera ...12 Subsequent Organization of This Manual 13 1 Basic Network Settings 15 Getting Ready ...16 Displaying the ...47 4 Remote Capture Using WFT Server 49 Configuring WFT Server Communication Settings 50 Displaying WFT Server ...52 Viewing Images...53 - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 7
GPS Devices 83 Connecting GPS Devices with a USB Cable 84 Connecting GPS Devices via Bluetooth 87 9 Troubleshooting 91 Responding to Error Messages ...92 Wireless LAN Notes...106 Checking Network Settings...107 10 Reference 109 Creating and Registering Captions 110 Specifications...111 - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 8
the transmitter (WFT-E2 IIA, E2 IIB, E2 IIC, and E2 IID) as described below. Please do not use your model (version) of transmitter in regions it was not designed for. For information on other areas where the transmitter can be used, contact Canon Service Center. Model (Version) Area of Use WFT-E2 - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 9
incompatible cameras may cause malfunction, accidents, and other problems not covered under warranty. Use the transmitter as a wireless or wired LAN device as described in this instruction manual. If you use the transmitter for any other purpose, Canon cannot be held liable for any loss or damage - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 10
malfunctions, becomes damaged, or requires repair, contact your dealer or the nearest Canon Service Center. Handling Precautions The transmitter is a precision instrument. Do not drop it or subject it to shock. The transmitter is not waterproof. Do not use it underwater. Wipe off any moisture with - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 11
Attachment pin Tightening screw Terminal USB lamp Network lamp Terminal cap receptacle (Not used with the EOS-1D Mark IV) Transmitter Case Waterproof/Dustproof USB Cap*2 External Media Case*1 *1: For storing portable hard disks or other devices. *2: Attach this cap before connecting - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 12
media. 1 Open the terminal cover on the camera. Open the extension system terminal cover and turn it toward the bottom. 2 Move the lever into the release position. 3 Attach the transmitter. Align the attachment pin with the WFT-E2 II/IIA mounting hole on the camera. Push the terminal firmly into - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 13
Subsequent Organization of This Manual Click one of the following chapter titles to view the corresponding page. 1 Basic Network Settings (p.15) 2 Transferring Images to an FTP Server (p.29) 3 Remote Capture Using EOS Utility (p.43) 4 Remote Capture Using WFT Server (p.49) 5 Linked Shooting (p.61) 6 - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 14
14 - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 15
Basic Network Settings Complete the basic network settings by following transmitter connection instructions on the camera menu screen. 15 - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 16
. To connect to a wired LAN, use a LAN cable to connect the transmitter and computer. Set the transmitter for connection to the wired network. Wireless Transmission of Movie Individual movie files are large, and wireless file transmission takes some time. When setting up an environment for stable - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 17
the connection instructions. If an error is displayed, refer to "Troubleshooting" in instructions will be closed during the configuration process. 1 Turn the camera on. 2 Display the transmitter menu. On the camera, press the button. On the [7] tab, select [WFT settings] and press . [WFT - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 18
systems), Windows XP Professional, Windows 2000, or Mac OS X 10.4 or 10.5 be installed on your computer. In addition, the computer must be set up as an FTP server in advance. For instructions camera operations in EOS Utility are supported. With this option, a wireless or wired network is used instead - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 19
attached with transmitters. Up to 10 slave cameras can be linked to the master camera on which you will release the shutter. Note that there will be a slight delay after you release the master camera shutter before the slave cameras shoot. Movie shooting is not supported. For further instructions on - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 20
LAN Type For [LinkedShot] instructions, refer to page 61. Note that no information about [LinkedShot] is given in this chapter. Turn the dial to select the type of LAN, and then press . Select [OK] and press to go to the next screen. Wireless LAN The [Wireless LAN setup method] screen - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 21
the first 9 characters of the SSID 4 Indicates the channel used Encryption by Wireless LAN Terminals If the wireless LAN terminal is encrypting communication, select the corresponding method in [Authentication] and [Encryption]. [Authentication]: Open system, Shared key, WPA-PSK, or WPA2-PSK - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 22
LAN terminal. For details on the encryption key, refer to the device's instruction manual. Note that the screens displayed in steps 1 to 3 below vary depending on the authentication and encryption of the wireless LAN terminal. 1 2 The [Key index] screen is displayed only if WEP encryption is - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 23
is located and how long to press it, refer to the instruction manual of the wireless LAN terminal. Select [OK] and press to establish a connection with the wireless LAN terminal. When the connection with the wireless LAN terminal is established, the [Network] screen (p.25) is displayed. 23 - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 24
LAN terminal, specify the 8-digit PIN code shown on camera LCD monitor. For instructions on setting PIN codes on the wireless LAN terminal, refer to the instruction manual of the wireless LAN terminal. Select [OK] and press to display the confirmation screen. 3 Establish a connection with - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 25
settings must be automatically assigned and configured in environments using DHCP servers or wireless LAN terminals or routers supporting DHCP server functions. If an error is displayed, select [Manual setting] regardless of whether the IP address and similar settings are automatically assigned - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 26
instructions are for settings screens that vary depending on the communication method (FTP Transfer, EOS Utility, or WFT these operations are not performed, the WFT Pairing Software described on page 44 may not start. Open the [C Drive] [Program Files] [Canon] [EOS Utility] [WFTPairing - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 27
Configuring Network Settings Virtual Keyboard Operation The virtual keyboard is displayed during entry of the encryption key, server name, and other information. Switching to other input areas To switch between input areas, press the button. Moving the cursor To move the cursor, turn the - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 28
28 - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 29
Transferring Images to an FTP Server With FTP transfer, you can automatically transfer each image to the FTP server as you shoot or transfer a set of shots together. 29 - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 30
IP address of the FTP server. If you have set the DNS server IP address setting to [Auto assign] or [Manual setting], the screen at left is displayed. For instructions on screen operations, refer to "Virtual Keyboard Operation" (p.27). Enter the FTP server's server name or IP address. 3 In [Port - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 31
the connection wizard is closed, the display reverts to the menu screen. Settings information is stored on the camera. It is not stored on the transmitter. The network settings for FTP transfer are now complete. 31 - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 32
without recording images, they cannot be transferred. Note that automatic transfer of movie is not supported. Transfer the movie after shooting, as described on pages 35-39. 1 In [WFT settings], select [Set up]. 2 Select [Automatic transfer]. Select [Enable]. 3 Take the picture. X The captured image - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 33
choose which images to transfer if different sizes of images are recorded to the memory card and external media, or during RAW+JPEG shooting. 1 In [WFT settings], select [Set up]. 2 Select [Transfer type/size]. 3 Select the size and type of images to transfer. If the camera is set up to record - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 34
add a caption before transferring images. You can also continue shooting even while images are being transferred. Transferring the Current Image 1 In [WFT settings], select [Set up]. 2 Select [Transfer with SET]. Select [Enable]. 3 Select the image. On the camera body, press the button. Select - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 35
The caption is also added to images stored on the camera. For instructions on creating and registering captions, refer to page 110. You can check Exif information, in the user comments. 1 Take the picture. 2 In [WFT settings], select [Transfer with caption]. X The last captured image is displayed. - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 36
+media/folder sel.] [Record/play]. You can also continue shooting even while images are being transferred. Selecting Images to Transfer 1 In [WFT settings], select [Image sel./ transfer]. 2 Select [Sel.Image]. X An image is displayed. 3 Select images to transfer. Press . Turn the dial to - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 37
> lamp blinks. Menu Operation During Image Transfer You can use the menu even during image transfer. However, to prevent transfer problems, some menu items are unavailable during transfer, including [WFT settings], [Protect images], [Erase images], [Format], and [Record func+media/folder sel.]. 37 - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 38
Batch Transfer Batch Transfer of Images in a Folder 1 In [WFT settings], select [Image sel./ transfer]. 2 Select [Sel.n]. 3 Select [Folder images not transfer'd]. To transfer images that could not previously be transferred, select [Folder images failed - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 39
Batch Transfer Batch Transfer of Images on memory Cards 1 In [WFT settings], select [Image sel./ transfer]. 2 Select [All image]. 3 Select [Card images not transferred]. To transfer images that could not previously be transferred, select [Card images - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 40
Checking Image Transfer History Checking the Transfer History of Individual Images To check the transfer history, in [Image sel./transfer], select [Sel.Image]. Image not selected for transfer (no icon) Image selected for transfer Image could not be transferred Image transferred Checking the Transfer - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 41
are stored is located in the folder of the user currently logged on, or in a subfolder there. Folders for Image Storage Under the default transmitter settings, transferred images will be stored in the root folder specified in the FTP server settings, in a folder structure such as A/DCIM/100EOS1D - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 42
42 - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 43
Remote Capture Using EOS Utility You can use EOS Utility to shoot remotely over a wireless or wired LAN. In addition to remote capture, all camera operations in EOS Utility are supported because a wireless or wired network is used with this option instead of the USB cable. 43 - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 44
instructions are continued from Chapter 1. With EOS Utility, you can use the included WFT Pairing Software to establish a connection between the transmitter and a computer. WFT the last six digits of the MAC address of the WFT-E2 II for the connection. 2 Start the pairing software. Normally, - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 45
. After you turn the dial to select [OK] and press , the connection wizard is closed and EOS Utility starts up. X The lamp on the transmitter is lit in green. Settings information is stored on the camera. It is not stored on the - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 46
settings. Before your next PTP session, simply turn on the camera to which the transmitter is attached and start the pairing software. The connection between the camera and computer will on the [Preferences] [Basic Settings] tab, select [ Add WFT Pairing Software to the Startup folder]. 46 - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 47
Using EOS Utility For EOS Utility instructions, refer to the Software Instruction Manual (PDF). You can take full advantage of EOS Utility via the transmitter just as via a USB connection, without restrictions. In Remote Live View shooting, the rate of image transmission is slower than via USB. The - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 48
48 - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 49
Remote Capture Using WFT Server Using a web browser, you can view images on a memory card in the camera and download them to a computer. Additionally, you can shoot remotely over a wireless or wired LAN. Note that bulb and movie shooting are not supported. 49 - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 50
WFT Server Communication Settings These instructions are continued from Chapter 1. Press . Turn the dial to select the set number, and then press . Press again. After the connection wizard is closed, the display reverts to the menu screen. X The lamp on the transmitter - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 51
to prevent conflicts when users at other computers are connected to the transmitter simultaneously. Turn the dial to select [User *], and then screen is displayed. For instructions on input screen operations, refer to "Virtual Keyboard Operation" (p.27). The WFT Server network settings are now - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 52
Server In the web browser, display WFT Server, a screen for transmitter operations. Make sure you have already established in the procedure on page 51. Click [OK] to display the WFT Server screen. Web browsers that support JavaScript now display the screen on the left below step 4. Otherwise, - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 53
Viewing Images Browse images on the camera's memory card as follows. 1 Click [Viewer]. X The image viewing screen is displayed. 2 Select the memory card. Click [CF], [SD], or the external media. Click the [DCIM] folder and select the folder containing the images. 3 Select an image. To view - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 54
Viewing Images 4 Download images to the computer. Click a thumbnail. X The image is displayed at a larger size. To download the image to your computer, click < >. Click [Return] to return to the image viewing screen. Although actual RAW images and movies are not displayed here, they can be - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 55
shooting. Note that remote capture of movies is not supported. For web browsers that do not support JavaScript, refer to page 59, "Remote Capture." 1 Menu ⑥ AF/MF switch ⑯ Live View shooting button ⑦ Shutter speed ⑰ Manual focus button ⑧ Aperture ⑱ Live View image screen ⑨ ISO speed ⑩ - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 56
View image is not displayed, enable Live View shooting in the menu (⑮). 4 Manually adjust the focus. Click the buttons < >, < >, < >, < >, < >, and < > to adjust the focus. Note that autofocus is not supported during Live View image display. To focus more closely, click < >, < >, or < >. To - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 57
Remote Capture [Camera control] 5 Configure the shooting settings. Click setting items (such as quality) to view the setting details, which you can configure. Complete the settings as needed. 6 Take the picture. Click the release button (⑤). When you let go of the mouse button, the camera shoots. X - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 58
. For web browsers that do not support JavaScript, refer to page 59, "Remote Capture." 1 Click [Simple control]. X The basic capture screen is displayed, and Live View image is displayed. Live View image screen Release button Manual focus button Focuses more closely < >< >< >: Focuses - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 59
Remote Capture The following instructions are for remote capture with web browsers that do not support JavaScript. First, prepare the camera for Live View shooting. Note that remote capture of movies is not supported. 1 Click [Capture]. X The capture screen is displayed. Live View image is not - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 60
60 - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 61
, up to 10 slave cameras can be linked in a wireless network (via IEEE 802.11g in ad hoc mode) to the master camera on which you will release the shutter. Any cameras compatible with linked shooting, when they have WFT series transmitters attached, can be used as slave cameras, regardless of model - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 62
the master camera. Because linked shooting utilizes a wireless connection via IEEE 802.11g in ad hoc mode, it is not available over wired LANs. 1 Display the transmitter menu. On the camera, press the button. On the [7] tab, select [WFT settings] and press . [WFT settings] is added to the tab - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 63
, select [OK]. X A screen is displayed as the connection is tested. The information you specified is stored on the cameras. It is not stored on the transmitters. 63 - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 64
100 m / 328 ft. However, the distance supported for linked shooting may be shorter depending on the wireless communication conditions, which are affected by how the compatible with linked shooting, when they have WFT series transmitters attached, can be used as slave cameras, regardless of model. 64 - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 65
Managing Settings Information 65 - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 66
Checking Settings Check the network settings as follows. 1 In [WFT settings], select [Set up]. 2 Select [Confirm settings]. X The settings are displayed. Example of FTP transfer and wired LAN settings Example of FTP transfer and wireless LAN settings 66 - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 67
the setting that determines what happens if an image of the same file name as an existing file is sent to the FTP server. (p.68) 1 In [WFT settings], select [Set up]. 2 Select [LAN settings]. 3 Select desired item from [LAN type], [TCP/IP], [FTP server], or [Wireless LAN] and change the setting. 67 - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 68
communication over the Internet. It provides effective security for both wireless and wired LANs. To use this function, you must enable Files of the Same Name Configured in [FTP server] [Overwrite same file]. When the transmitter is configured to prevent overwriting If there is already a file - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 69
Saving and Loading Settings Network settings can be saved on a memory card for use with other cameras. Saving Settings 1 In [WFT settings], select [Set up]. 2 Select [LAN settings]. 3 Select the settings number. Here, select the settings number that identifies the LAN settings. 4 Select [Change - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 70
name is determined automatically by the camera: WFTNPF, followed by a number (01 to 99) and the extension NIF. You can rename the file as desired by selecting [Change file name]. Loading Settings Load settings files stored on a memory card as follows. Also use this procedure when loading settings - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 71
used, use a self-powered drive. Buspowered drives do not work in some situations. The main image storage area must be formatted with a FAT16 or FAT32 file system. Use media with a main image storage area of less than 1 TB (terabyte), with 512 bytes per sector. Do not use external media equipped with - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 72
camera. The transmitter USB port is not hot-pluggable. USB cables cannot be connected or disconnected at any time. Follow the instructions in this turn it on after connecting it. 2 In [WFT settings], select [USB device connec.]. If you will not use a wireless or wired LAN at the same time as the - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 73
image playback are not possible until the connection is established. When the transmitter is connected to the external media, the transmitter's lamp is lit in green and a message is displayed be formatted using the camera. Format it with a FAT16 or FAT32 file system using the computer. 73 - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 74
as shown in step 5. Follow the instructions displayed to terminate the connection. The connection External Media External media is powered via the transmitter's USB port as needed. However, external hard cases. Power Management If you will not use a wireless or wired LAN at the same time as the - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 75
can also configure [Record func.], [Record/play], and [Folder] settings (described below) to use the external media. For details, refer to the Camera Instruction Manual (page 56). When recording movies to a hard disk, use a hard disk with fast write speeds. On the [5] tab, select [Record func+media - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 76
and day) and numbers representing the order the folder was created, in a range of 01 to 99. Always use 8 characters for the folder name. For instructions on entering the folder name, refer to "Virtual Keyboard Operation" (p.27). 76 - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 77
[Record/ play]. After selection, press the button to return to the menu screen. 3 On the [3] tab, select [Image copy]. For subsequent instructions, refer to the Camera Instruction Manual (page 176). Operations are the same as when using a CF or SD card, except that the external media icon is - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 78
possible. 3 Select the method of backup. Select [Quick backup] or [Backup]. You can also backup the MISC folder, where printing and transfer instructions are stored. External media cannot be backed up onto memory cards. If the backup destination already has a folder of the same number containing - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 79
Backing Up on External Media \\\ Quick Backup A simple method of backup is available, as follows. 1 Select [Quick backup]. 2 Select the source memory card. 3 Select [Start]. 4 Select [OK]. X The backup process now begins. When the message indicating completion is displayed, select [OK]. 79 - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 80
Backing Up on External Media Where the DCIM Folder is Stored The DCIM folder is stored in a directory indicated by a file path such as [u/09103102/]. The target folder name comprises the current date (last two digits of the year, in addition to the month and day) - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 81
Backing Up on External Media 4 Select [Create folder]. 5 Enter the [Folder name]. Always use 8 characters for the folder name. For instructions on entering the folder name, refer to "Virtual Keyboard Operation" (p.27). 6 Select [Start]. 7 Select [OK]. X The backup process now begins. When the - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 82
Backing Up on External Media External Media Case The provided external media case can hold portable hard disks up to 120 x 75 x 15 mm/ 4.72 x 2.95 x 0.59 in. 82 - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 83
the camera as well as by using GPS-compatible mapping software. The transmitter can be used with Garmin GPSMAP or eTrex series or Magellan eXplorist specific GPS devices supported, contact the Canon Service Center. For GPS device instructions, refer to the device's instruction manual or contact the - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 84
The transmitter USB port is not hot-pluggable. USB cables cannot be connected or disconnected at any time. Follow the instructions in turn the GPS device on until step 5. 2 In [WFT settings], select [USB device connec.]. If you will not use a wireless or wired LAN at the same time as the GPS device - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 85
[OK]. X At this point, the menu option [Disconnect] becomes available. Select this option before disconnecting the GPS device. 6 7 Take the picture. Make sure the transmitter's lamp is lit in green before shooting. If the lamp is not lit in green when you shoot, correct GPS data will - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 86
port, always select [Disconnect] as shown in step 5. Follow the instructions displayed to terminate the connection. The connection will not be terminated if steps to terminate the connection. Power Management If you will not use a wireless or wired LAN at the same time as the GPS device, set [ - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 87
non-Canon Bluetooth units, confirm normal operation before use. Turn off the GPS device and camera before attaching the Bluetooth unit to the transmitter. The transmitter's USB port is not hot-pluggable. Bluetooth units cannot be connected or disconnected indiscriminately. Follow the instructions in - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 88
Select this option before detaching the GPS device. 6 Establish a wireless connection between the GPS device and Bluetooth unit. 7 Turn on device, a password input screen is displayed. Enter the password. X The transmitter now starts to establish a connection with the GPS device. It may take - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 89
GPS connection status changes to [Connecting]. Pressing under these conditions will enable you to disconnect the GPS device. 9 Take the picture. Make sure the transmitter's lamp is lit in green before shooting. If the lamp is not lit in green when you shoot, the correct GPS data - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 90
port, always select [Disconnect] as shown in step 5. Follow the instructions displayed to terminate the connection. The connection with the Bluetooth unit will to terminate the connection. Power Management If you will not use a wireless or wired LAN at the same time as the Bluetooth unit, set - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 91
Troubleshooting 91 - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 92
Responding to Error Messages If transmitter errors are displayed on the camera LCD monitor, refer to the examples of corrective actions in this section to eliminate the cause of the error. The error details can also be checked on the [7] tab [WFT settings] [Error description]. Click the error - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 93
software and follow the instructions to re-establish the connection. (p.44) Are the transmitter and wireless LAN terminal configured with X If no DHCP server is used, set the transmitter's network setting to [Manual setting] and IP address setting to [Manual setting]. (p.25) What to check on the DHCP - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 94
Messages 22: No response from DNS server What to check on the transmitter On the transmitter, the DNS address setting is [Auto assign] or [Manual setting]. Does the error occur under these settings? X If no DNS server is used, set the transmitter's DNS address setting to [Disable]. (p.25) On the - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 95
server. X If applicable, ask your network administrator for the proxy server address or server name and port number, and then enter them on the transmitter. What to check on the network as a whole Does your network include a router or similar device that serves as a gateway? X If applicable, ask - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 96
, the network setting is [Auto setting]. Does the error occur under this setting? X If no DHCP server is used, set the transmitter's network setting to [Manual setting]. (p.25) What to check on the DHCP server Is the DHCP server on? X Turn the DHCP server on. Are the DHCP server settings for - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 97
in [WFT settings], file system? X Format the external media with a FAT16 or FAT32 file system using the computer. The GPS device is incompatible with the transmitter. X Among GPS devices, we recommend devices for which operation has been verified by Canon. 33: USB device error There is a problem - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 98
actual FTP server address. (p.30) Are the transmitter and wireless LAN terminal configured with the same encryption key for authentication? X This error occurs if the encryption keys do not match when the authentication method for encryption is [Open system]. The setting is case-sensitive, so check - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 99
access to the FTP server. X You may be able to access the FTP server by setting [Passive mode] to [Enable] on the transmitter. (p.68) If you are using Windows XP Service Pack 2 or later, is access to the FTP server blocked by [Windows Firewall]? X Change the Windows Firewall settings to allow access - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 100
check the upper- and lower-case characters to make sure the password on the transmitter matches it. (p.31) What to check on the FTP server Do the user rights to the target folder on the FTP server to allow saving images from the transmitter. Is the FTP server on? X Turn the FTP server on. The server - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 101
reason, the transmitter fails to receive confirmation from the FTP server that image file transfer is complete to be lost if there are nearby wireless LAN terminals, cordless telephones, microphones, microwave service The GPS device does not support SPP (Serial Port Profile). X Confirm that the GPS - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 102
LAN terminal, and configure the same SSID on the transmitter. (p.21) What to check on the wireless LAN terminal Is the wireless LAN terminal on? X Turn on the wireless LAN terminal. When you are using WFT-E2 IID with wireless LAN terminals supporting IEEE 802.11a, are the terminal settings locked on - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 103
and [WPA2-PSK]. (p.21) X When using an AirPort for communication in infrastructure mode, [Open system] is not supported. Configure a [Shared key] on the transmitter. (p.21) Are the transmitter and wireless LAN terminal configured with the same encryption key for authentication? X The setting is case - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 104
if the authentication method is [Open system], an Error 41 ("Cannot connect to FTP server") is displayed. 67: Incorrect wireless LAN encryption method Are the transmitter and wireless LAN terminal configured for the same encryption method? X The transmitter supports these encryption methods: [WEP - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 105
Operate slave cameras by following the correct instructions (p.62, 63). Are the slave cameras securely connected? X Reconnect the LAN cable between the transmitter and server. Because the cable may be severed, try mode. 99: Other error Another problem has occurred, identified with an error number other than - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 106
problems occur. Wireless LAN Terminal Installation and Antenna Position When using the transmitter indoors, install the wireless wireless IEEE 802.11b/g devices, leave a gap of four channels between each wireless LAN channel. For example, use channels 1, 6, and 11, channels 2, 7, and 12, or channels - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 107
Checking Network Settings Windows Click the Windows [Start] button [All Programs] [Accessories] [Command Prompt]. Type ipconfig/all and press the key. The IP address assigned to the computer is displayed, as well as the subnet mask, gateway, and DNS server information. To avoid using - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 108
108 - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 109
Reference 109 - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 110
the computer with the USB cable and starting EOS Utility, refer to the Software Instruction Manual (PDF) provided with the camera. Note that captions cannot be created for cameras without an attached transmitter. 1 Start EOS Utility and select [Camera settings/Remote shooting]. X The camera settings - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 111
to the wireless LAN access point WFT-E2 IIA: 5,180 - 5,320 MHz, channels 36 - 64 5,745 - 5,825 MHz, channels 149 - 165 2,412 - 2,462 MHz, channels 1 - 11 WFT-E2 IIB: 5,180 - 5,320 MHz, channels 36 - 64 5,500 - 5,700 MHz, channels 100 - 140 2,412 - 2,472 MHz, channels 1 - 13 WFT-E2 IIC: 5,745 - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 112
) standards * Fewer images can be captured when transferring images over wireless LAN. * Fewer images can be captured when using bus-powered Canon testing standards. Transmitter specifications and appearance are subject to change without notice Model Number WFT-E2 IIA WFT-E2 IIB WFT-E2 IIC WFT-E2 - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 113
113 - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 114
114 - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 115
115 - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 116
Inc. dat het toestel CH9-1161 in overeenstemming is met de essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EG. Hawnhekk, Canon Inc., jiddikjara li dan CH9-1161 jikkonforma mal-ƫtiƥijiet essenzjali u ma provvedimenti oƫrajn relevanti li hemm fid-Dirrettiva 1999/5/EC. Alulírott - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 117
instructions /TV technician transmitter. The available scientific evidence does not show that any health problems are associated with using low power wireless devices. There is no proof, however, that these low power wireless devices are absolutely safe. Low power Wireless CANON INC. Cameras - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 118
Channel 8 Connection 17 D DHCP server 25 DNS address 25 DNS server 30 E Encryption 21, 68 Encryption key 22 EOS Utility 13, 43, 47 EOSUtility 18 Error 92 ESS-ID 21 F File camera 63 Movie 32, 54, 55 N Network 15 O Open system 21 P Pairing 26, 44 Passive mode 68 Password 50 PBC mode - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 119
41 Transferring images, automatic 32 Transferring images, individual images..... 34 Troubleshooting 91 U URL 52 V Viewing images 53 W Web 52 WEP 21 WFT Server 13, 49 WFTserver 19 Wi-Fi Protected Setup 23 Wired LAN 20 Wireless LAN specification 8 Wizard 17 WPA2-PSK 21 WPA-PSK 21 WPS - Canon Wireless File Transmitter WFT-E2 II A | WFT-E2 II Instruction Manual for U - Page 120
MARKETING JAPAN INC. 16-6, Kohnan 2-chome, Minato-ku, Tokyo 108-8011, Japan This instruction manual is current as of November 2009. For information on using the transmitter with accessories introduced after this date, contact your nearest Canon Service Center. CT1-7835aE-001 © CANON INC. 2010
Wireless File Transmitter
WFT-E2 II
Instruction Manual for Use With EOS-1D Mark IV
To EOS-1D Mark III or EOS-1Ds Mark III Users
This instruction manual describes the use of the transmitter when connected to the EOS-1D Mark IV.
When using the transmitter with the EOS-1D Mark III or EOS-1Ds Mark III, refer to the PDF
manual in the EOS_1DIII_1DsIII folder.
To comply with local radio wave regulations, Canon offers four region-specific versions of
the transmitter (WFT-E2 IIA, E2 IIB, E2 IIC, and E2 IID) in various areas around the world
(p.8). For convenience, we refer to the product in this manual simply as “the transmitter,”
without reference to versions A, B, C, or D.
E
INSTRUCTION MANUAL