Canon Wireless File Transmitter WFT-E2 II A WFT-E2 II Instruction Manual for U - Page 87
Connecting GPS Devices via Bluetooth
View all Canon Wireless File Transmitter WFT-E2 II A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Connecting GPS Devices via Bluetooth By attaching the Canon Bluetooth Unit BU-30 to the USB port, you can connect Bluetooth® GPS devices wirelessly. (Bluetooth® devices other than GPS devices cannot be connected). When using non-Canon Bluetooth units, confirm normal operation before use. Turn off the GPS device and camera before attaching the Bluetooth unit to the transmitter. The transmitter's USB port is not hot-pluggable. Bluetooth units cannot be connected or disconnected indiscriminately. Follow the instructions in this section when attaching or detaching Bluetooth units. 1 Attach the Bluetooth unit. Open the port cover and attach the Bluetooth unit. 2 In [WFT settings], select [USB device connec.] If you will not use a wireless or wired LAN at the same time as the Bluetooth unit, set [Communication mode] to [Disconnect]. 3 Select [Bluetooth]. 4 Select [Connect]. 87