Canon Wireless File Transmitter WFT-E2 II A WFT-E2 II Instruction Manual for U - Page 12
Attaching to the Camera
View all Canon Wireless File Transmitter WFT-E2 II A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Attaching to the Camera Turn off the camera before attaching the transmitter. Ensure the camera battery has sufficient charge. If the charge drops below 19%, you cannot transfer captured images or back them up to external media. 1 Open the terminal cover on the camera. Open the extension system terminal cover and turn it toward the bottom. 2 Move the lever into the release position. 3 Attach the transmitter. Align the attachment pin with the WFT-E2 II/IIA mounting hole on the camera. Push the terminal firmly into the camera. As you push the terminal into the camera, turn the tightening screw until it stops rotating to attach the transmitter securely. 4 Move the lever into the locked position. The transmitter is now attached to the camera. The transmitter will be powered by the camera. Removal Turn off the camera. Push the lever down, into the release position. Loosen the tightening screw until it spins freely. Pull the terminal out of the camera. 12