Canon Wireless File Transmitter WFT-E2 II A WFT-E2 II Instruction Manual for U - Page 25

Configuring Network Settings

Get Canon Wireless File Transmitter WFT-E2 II A PDF manuals and user guides View all Canon Wireless File Transmitter WFT-E2 II A manuals
Add to My Manuals
Save this manual to your list of manuals

Page 25 highlights

Configuring Network Settings Turn the dial to select how to configure the network settings, and then press . Select [OK] and press to go to the next screen. [Auto setting] Settings otherwise configured with [Manual setting] can be configured automatically. However, the IP address and similar settings must be automatically assigned and configured in environments using DHCP servers or wireless LAN terminals or routers supporting DHCP server functions. If an error is displayed, select [Manual setting] regardless of whether the IP address and similar settings are automatically assigned and configured. [Manual setting] The [IP address set.] screen is displayed after you select [Manual setting]. If [Auto setting] results in an error, enter the IP address manually. As the IP address, enter the IP address assigned to the camera. Enter the [IP address], [Subnet mask], [Gateway], and [DNS address] on each screen as they are displayed. If you are not sure what to enter, refer to page 107, "Checking Network Settings," or ask the network administrator or another person knowledgeable about the network. When entering numbers for the IP address, subnet mask, and so on, press to move the input position and turn the dial to enter the number. 25

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
25
Turn the <
5
> dial to select how to configure the
network settings, and then press <
0
>.
Select [
OK
] and press <
0
> to go to the next
screen.
[Auto setting]
Settings otherwise configured with [
Manual setting
] can be configured automatically.
However, the IP address and similar settings must be automatically assigned and
configured in environments using DHCP servers or wireless LAN terminals or routers
supporting DHCP server functions.
If an error is displayed, select [
Manual setting
] regardless of whether the IP address and
similar settings are automatically assigned and configured.
[Manual setting]
The [
IP address set.
] screen is displayed after you select
[
Manual setting
]. If [
Auto setting
] results in an error, enter
the IP address manually. As the IP address, enter the IP
address assigned to the camera.
Enter the [
IP address
], [
Subnet mask
], [
Gateway
], and
[
DNS address
] on each screen as they are displayed.
If you are not sure what to enter, refer to page 107, “Checking
Network Settings,” or ask the network administrator or
another person knowledgeable about the network.
When entering numbers for the IP address, subnet mask,
and so on, press <
0
> to move the input position and turn
the <
5
> dial to enter the number.
Configuring Network Settings