Canon Wireless File Transmitter WFT-E2 II A WFT-E2 II Instruction Manual for U - Page 105
Cannot connect to slave cameras, Wired LAN connection lost, Other error
View all Canon Wireless File Transmitter WFT-E2 II A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
Responding to Error Messages 71: Cannot connect to slave cameras Are you following the correct procedure to establish the connection with slave cameras? X Operate slave cameras by following the correct instructions (p.62, 63). Are the slave cameras too far from the master camera? X Bring the slave cameras closer to the master camera. 72: Cannot connect to the master camera Are you following the correct procedure to establish the connection with master camera? X Operate the master camera by following the correct instructions (p.62, 63). Is the master camera too far from the slave cameras? X Bring the master camera closer to the slave cameras. 81: Wired LAN connection lost Is the LAN cable securely connected? X Reconnect the LAN cable between the transmitter and server. Because the cable may be severed, try using another cable to connect the devices. Is the hub or router on? X Turn on the hub or router. Is the server on? X Turn the server on. The server may have been turned off because of an energy-saving mode. 99: Other error Another problem has occurred, identified with an error number other than 11 to 81. X Turn the camera's power switch off and on. 105