Canon Wireless File Transmitter WFT-E2 II A WFT-E2 II Instruction Manual for U - Page 86
Unplugging GPS Devices from the USB Port, Power Management, Disconnect, Communication mode
View all Canon Wireless File Transmitter WFT-E2 II A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
Connecting GPS Devices with a USB Cable Unplugging GPS Devices from the USB Port Before unplugging GPS devices from the USB port, always select [Disconnect] as shown in step 5. Follow the instructions displayed to terminate the connection. The connection will not be terminated if you simply turn off the camera and GPS device. If you unplug GPS device while the connection is still active, plug the GPS device into the USB port again and follow the preceding steps to terminate the connection. Power Management If you will not use a wireless or wired LAN at the same time as the GPS device, set [Communication mode] to [Disconnect]. The camera battery drains faster under settings other than [Disconnect] because power saving is disabled. 86
86
Connecting GPS Devices with a USB Cable
Before unplugging GPS devices from the USB port, always select [
Disconnect
] as shown in
step 5. Follow the instructions displayed to terminate the connection.
The connection will not be terminated if you simply turn off the camera and GPS device. If you
unplug GPS device while the connection is still active, plug the GPS device into the USB port
again and follow the preceding steps to terminate the connection.
If you will not use a wireless or wired LAN at the
same time as the GPS device, set
[
Communication mode
] to [
Disconnect
]. The
camera battery drains faster under settings other
than [
Disconnect
] because power saving is
disabled.
Unplugging GPS Devices from the USB Port
Power Management