Canon Wireless File Transmitter WFT-E2 II A WFT-E2 II Instruction Manual for U - Page 84
Connecting GPS Devices with a USB Cable
View all Canon Wireless File Transmitter WFT-E2 II A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
Connecting GPS Devices with a USB Cable Turn off the GPS device and camera before connecting them. When connecting GPS devices, be sure to use the USB cable provided with the camera. The transmitter USB port is not hot-pluggable. USB cables cannot be connected or disconnected at any time. Follow the instructions in this section when connecting or disconnecting USB cables. 1 Plug the GPS device into the USB port. Open the port cover and connect the GPS device. Do not connect GPS device via a USB hub. Do not turn the GPS device on until step 5. 2 In [WFT settings], select [USB device connec.]. If you will not use a wireless or wired LAN at the same time as the GPS device, set [Communication mode] to [Disconnect]. 3 Select [GPS]. 4 Select [Connect]. 84