Canon imageCLASS MF5770 imageCLASS MF5770 Network Guide - Page 20

Confirm the settings you specified, click [OK]., When the following message box appears

Page 20 highlights

Specifying the Network Settings [Subnet Mask]: [Broadcast Address]: Enter the subnet mask used for the TCP/IP network. Enter the broadcast address used for the TCP/IP network. NOTE • The settings for [IP Address], [Gateway Address], [Subnet Mask], and [Broadcast Address] cannot be entered if [DHCP] is selected from [IP Address Settings with]. • If a DHCP server cannot be used, select [Manual Setting] from [IP Address Settings with]. 8 Confirm the settings you specified ➞ click [OK]. 2 9 When the following message box appears, click [OK]. The settings are enabled after a short time. The preparation for the machine's protocol settings is complete. Preparation for Protocol Settings 2-9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49

Preparation for Protocol Settings
2-9
Specifying the Network Settings
2
[Subnet Mask]:
Enter the subnet mask used for the TCP/IP network.
[Broadcast Address]:
Enter the broadcast address used for the TCP/IP
network.
NOTE
The settings for [IP Address], [Gateway Address], [Subnet Mask], and [Broadcast
Address] cannot be entered if [DHCP] is selected from [IP Address Settings with].
If a DHCP server cannot be used, select [Manual Setting] from [IP Address
Settings with].
8
Confirm the settings you specified
click [OK].
9
When the following message box appears, click [OK].
The settings are enabled after a short time.
The preparation for the machine’s protocol settings is complete.