Canon imageCLASS MF7460 imageCLASS MF7400 Series Starter Guide - Page 24
Press [Subnet Mask] and [Gateway Address] and, Press [IP Address Settings].
View all Canon imageCLASS MF7460 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
6 Press [IP Address Settings]. 9 Press [OK]. 7 Press [IP Address], then enter the IP address using - (Numeric Keys). 10 Press the main power switch on the right side of the machine to " " side, wait at least 10 seconds, and then press the main power switch to "I" side. If you specify an IP address using DHCP, BOOTP, or RARP, press [DHCP], [BOOTP], or [RARP]. One of the DHCP, BOOTP, or RARP settings can be selected at any one time. 8 Press [Subnet Mask] and [Gateway Address] and specify the settings in the same way. 23
²³
6
Press [IP Address Settings].
7
Press [IP Address], then enter the IP address
using
-
(Numeric Keys).
If you specify an IP address using DHCP, BOOTP, or RARP,
press [DHCP], [BOOTP], or [RARP]. One of the DHCP, BOOTP,
or RARP settings can be selected at any one time.
8
Press [Subnet Mask] and [Gateway Address] and
specify the settings in the same way.
9
Press [OK].
10
Press the main power switch on the right side
of the machine to “
” side, wait at least ±0
seconds, and then press the main power
switch to “I” side.