Canon imageFORMULA DR-6010C DR-6010C Users Manual - Page 17
Installation Requirements - manual
View all Canon imageFORMULA DR-6010C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Chapter 2 Setup 2-2 Installation Requirements To use the DR-6010C scanner, your computer must satisfy the following system requirements. • One of the following operating systems: - Microsoft Windows XP Professional SP3 or later - Microsoft Windows XP Home Edition SP3 or later - Microsoft Windows XP Professional x64 Edition SP2 or later - Microsoft Windows Vista SP2 or later (32-bit Edition/64-bit Edition) - Microsoft Windows 7 (32-bit Edition/64-bit Edition) Note Microsoft Windows Vista has 32- and 64-bit versions. • A computer that meets the following specifications: - CPU: Celeron M (1.4 GHz or faster) - Memory: 512 MB or more - Hard disk: 1 GB or more available space - Interface: USB port present as standard equipment on the computer (Hi-Speed USB 2.0) or SCSI expansion card - Monitor: Resolution of 1024 × 768 (XGA) or better recommended. • When using a SCSI expansion card, select one of the following recommended models. - AHA-2930U (Adaptec) - PCI30U (Ratoc Systems) - CB31U (Ratoc Systems) • An ISIS-compatible application or a TWAIN-compatible application that is compatible with the above operating systems. IMPORTANT • If you do not know the requirements for your computer system, contact the store where you purchased the computer or the manufacturer of the computer for more information. • Do not connect both a USB interface and a SCSI card at the same time. • Be aware of the following information when using the USB interface that was provided as standard with your computer. - The USB interface should be a Hi-Speed USB 2.0 interface. - Scanning speeds are lower if your computer's standard USB interface is USB Full-Speed (equal to USB 1.1.) In this case, using a SCSI expansion card is recommended. - Use the latest USB 2.0 driver made available by Microsoft. For details, consult your local authorized Canon dealer. - Normal operation is not guaranteed with all USB interfaces, even if present as standard equipment on the computer. For details, consult your local authorized Canon dealer. - The USB cable you are using should be the one originally included with the scanner or a Hi-Speed USB 2.0 compatible cable. • Be aware of the following information when using a SCSI card. - Make sure to follow the procedure in the manual for the SCSI card and the computer that you are using when installing a SCSI card in your computer. - The overall length of the SCSI cable you can use is determined by the SCSI standards. Refer to the manual for the SCSI card you are using for more information. • If the CPU, memory, interface card, and other specifications do not satisfy the installation requirements, the scanning speed may be greatly reduced and transmission may take a long time. 2-2