Canon imageFORMULA DR-6010C DR-6010C Users Manual - Page 83

The PC Does Not Recognize the Scanner (Connecting via SCSI)

Get Canon imageFORMULA DR-6010C PDF manuals and user guides View all Canon imageFORMULA DR-6010C manuals
Add to My Manuals
Save this manual to your list of manuals

Page 83 highlights

Chapter 5 Troubleshooting Problem Solution The scanner does not support your USB interface. This product is not guaranteed to operate with all types of USB interfaces. Contact your local authorized Canon dealer or service representative for more information. (See p. 2-2.) Problem The scanner does not support the USB cable. Solution Use the USB cable provided with the scanner. Problem The USB hub is not compatible with the scanner. Solution Remove the USB hub. ✘ The PC Does Not Recognize the Scanner (Connecting via SCSI) The following are possible causes of the PC failing to recognize the scanner. Check each possible cause. Problem The scanner is not connected correctly. Solution Make sure that the scanner and the computer are correctly connected. (See p. 2-12.) Problem Solution The SCSI card is not correctly installed in the PC. Refer to the documentation for the SCSI card and the computer. Make sure that the SCSI card is correctly installed in the computer and that it is enabled properly under the operating system in use. Problem Solution The scanner's SCSI ID is identical to the SCSI ID of another device. Check the SCSI IDs of all SCSI devices connected to the system and set a unique SCSI ID for the scanner. (See p. 2-12.) Problem Solution The terminator is not set correctly. Shut down both the PC and the scanner, and then turn the scanner ON first, and then the PC. (See p. 2-12.) Problem Solution There is a problem with another SCSI device that is connected in the daisy chain. Do not use the daisy chain connection configuration. (See p. 2-12.) Problem Solution The PC was turned ON before the scanner. Shut down both the PC and the scanner, and then turn the scanner ON first, and then the PC. (See p. 2-14.) Problem Solution The scanner is not ON. Check to see if the scanner is ON. If the scanner is not ON, shut down the PC, then turn the scanner ON first, and then the PC. (See p. 2-14.) Problem The SCSI card is not compatible with the scanner. Solution Use a recommended SCSI card. (See p. 2-2.) 5-2

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
Chapter 5
Troubleshooting
5-2
Problem
The scanner does not support your USB interface.
Solution
This product is not guaranteed to operate with all types of USB interfaces. Contact
your local authorized Canon dealer or service representative for more information.
(See p. 2-2.)
Problem
The scanner does not support the USB cable.
Solution
Use the USB cable provided with the scanner.
Problem
The USB hub is not compatible with the scanner.
Solution
Remove the USB hub.
✘
The PC Does Not Recognize the Scanner (Connecting via SCSI)
The following are possible causes of the PC failing to recognize the scanner. Check each
possible cause.
Problem
The scanner is not connected correctly.
Solution
Make sure that the scanner and the computer are correctly connected.
(See p. 2-12.)
Problem
The SCSI card is not correctly installed in the PC.
Solution
Refer to the documentation for the SCSI card and the computer. Make sure that the
SCSI card is correctly installed in the computer and that it is enabled properly under
the operating system in use.
Problem
The scanner’s SCSI ID is identical to the SCSI ID of another device.
Solution
Check the SCSI IDs of all SCSI devices connected to the system and set a unique
SCSI ID for the scanner.
(See p. 2-12.)
Problem
The terminator is not set correctly.
Solution
Shut down both the PC and the scanner, and then turn the scanner ON first, and then
the PC.
(See p. 2-12.)
Problem
There is a problem with another SCSI device that is connected in the daisy
chain.
Solution
Do not use the daisy chain connection configuration.
(See p. 2-12.)
Problem
The PC was turned ON before the scanner.
Solution
Shut down both the PC and the scanner, and then turn the scanner ON first, and then
the PC.
(See p. 2-14.)
Problem
The scanner is not ON.
Solution
Check to see if the scanner is ON. If the scanner is not ON, shut down the PC, then
turn the scanner ON first, and then the PC.
(See p. 2-14.)
Problem
The SCSI card is not compatible with the scanner.
Solution
Use a recommended SCSI card.
(See p. 2-2.)