Canon imageFORMULA ScanFront 300 ScanFront 300/300P Setup Guide
Canon imageFORMULA ScanFront 300 Manual
View all Canon imageFORMULA ScanFront 300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Canon imageFORMULA ScanFront 300 manual content summary:
- Canon imageFORMULA ScanFront 300 | ScanFront 300/300P Setup Guide - Page 1
Setup Guide Read This First Please read this manual before using the scanner. After you finish reading this manual, keep it in a safe place for future reference. - Canon imageFORMULA ScanFront 300 | ScanFront 300/300P Setup Guide - Page 2
up to 230 minutes, we recommend using the default setting. FCC REGULATIONS (For 120 V model) Network in accordance with the instructions, may cause harmful manual. If such changes or modifications should be made, you could be required to stop operation of the equipment. Canon U.S.A. Inc. One Canon - Canon imageFORMULA ScanFront 300 | ScanFront 300/300P Setup Guide - Page 3
Scanner. ScanFront 300: Model M11-1041 ScanFront 300P: Model M11-1051 Trademarks • Canon and the Canon logo are registered trademarks of Canon Inc. in the United States and may also be trademarks or registered trademarks in other countries. • imageFORMULA is a trademark of Canon Electronics Inc - Canon imageFORMULA ScanFront 300 | ScanFront 300/300P Setup Guide - Page 4
Copyright libtiff Copyright (c) 1988-1996 Sam Leffler Copyright (c) 1991-1996 Silicon Graphics, Inc. Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted without fee, provided that (i) the above copyright notices and this - Canon imageFORMULA ScanFront 300 | ScanFront 300/300P Setup Guide - Page 5
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) DISPOSED OF ACCORDING TO LOCAL, STATE OR FEDERAL LAWS. Copyright 2010 by CANON ELECTRONICS INC. All rights reserved. No part of this publication may be reproduced - Canon imageFORMULA ScanFront 300 | ScanFront 300/300P Setup Guide - Page 6
Manual 2 Important Safety Instructions 3 Installation Location 3 Power 3 Moving the Scanner 4 Handling 4 About the Fingerprint Sensor (ScanFront 300P only 6 Disposal 6 ScanFront 17 6. Scanning Procedure 18 7. Supplied Applications 21 ScanFront Service 21 ScanFront Administration Tool 21 - Canon imageFORMULA ScanFront 300 | ScanFront 300/300P Setup Guide - Page 7
Canon imageFORMULA ScanFront 300/300P network scanner. Please read this manual thoroughly before using the scanner to familiarize yourself with its capabilities, and to make the most of its many functions. After reading this manual the supplied ScanFront Service software must be installed on a - Canon imageFORMULA ScanFront 300 | ScanFront 300/300P Setup Guide - Page 8
procedure for setting up the scanner for scanning. Set up the ScanFront in accordance with the Setup Guide. For details on the ScanFront, refer to the Operation Guide* and ScanFront 300/300P INSTRUCTIONS (electronic manuals). Operation Guide* Provides an overview of the functions of the scanner, and - Canon imageFORMULA ScanFront 300 | ScanFront 300/300P Setup Guide - Page 9
Important Safety Instructions To ensure the safe operation of this scanner, be sure to read the safety warnings and precautions described below. ❏ Installation Location The performance of this - Canon imageFORMULA ScanFront 300 | ScanFront 300/300P Setup Guide - Page 10
with any other electrical devices. Model: MG1-4314 ● If you have any questions regarding the power supply, contact your local authorized Canon dealer or service representative for further information. ❏ Moving the Scanner ● When moving the scanner, always hold it with both hands to avoid dropping it - Canon imageFORMULA ScanFront 300 | ScanFront 300/300P Setup Guide - Page 11
use the machine, immediately turn the power OFF, and disconnect the power plug from the power outlet. Then, contact your local authorized Canon dealer or service representative for further information. ■ Do not drop the scanner, or subject it to impact or strong shock. Should the scanner ever become - Canon imageFORMULA ScanFront 300 | ScanFront 300/300P Setup Guide - Page 12
❏ About the Fingerprint Sensor (ScanFront 300P only) ● The following actions may damage the sensor or cause it to malfunction: - Dropping an object on the fingerprint sensor, or otherwise subjecting it to a - Canon imageFORMULA ScanFront 300 | ScanFront 300/300P Setup Guide - Page 13
Home screen. For more details on this procedure, refer to the Operation Guide and ScanFront 300/300P INSTRUCTIONS (electronic manual). 7. Supplied Applications (See p. 21) This section describes the applications (ScanFront Service and ScanFront Administration Tool) that are included on the supplied - Canon imageFORMULA ScanFront 300 | ScanFront 300/300P Setup Guide - Page 14
Canon dealer. ScanFront 300 Feed Roller The feed roller must be attached to the scanner during installation. (See p. 9.) Operation Guide The printed version of Operation Guide may vary depending on your region. PDF files of the Operation Guide in other languages can be found on the INSTRUCTIONS - Canon imageFORMULA ScanFront 300 | ScanFront 300/300P Setup Guide - Page 15
2. Removing the Packing Materials and Attaching the Feed Roller Remove all of the packing materials protecting the scanner, and attach the feed roller. 1. Remove the orange tape (3 pieces) securing the outer case. CAUTION The open/close movement of the panel unit is linked to the up/ down - Canon imageFORMULA ScanFront 300 | ScanFront 300/300P Setup Guide - Page 16
6. Lift up the roller lock lever a, and slide it in the direction of the arrow b. 9. Lower the roller lock lever to lock the feed roller into position. 7. Align the notch in the shaft of the roller with the shaft of the scanner, and place the feed roller into position. 10. Close the roller cover. - Canon imageFORMULA ScanFront 300 | ScanFront 300/300P Setup Guide - Page 17
3. Installing the Scanner and Connecting to a Network Before setting up the scanner, you need to move it to the installation site, and connect the AC adaptor and network cable. IMPORTANT For information on installation safety, see p. 3. ❏ Connecting the AC Adapter Follow the procedure shown below to - Canon imageFORMULA ScanFront 300 | ScanFront 300/300P Setup Guide - Page 18
switch out of Low Power mode, press the power switch or touch the touch panel. (Refer to "Low Power Mode" on p.6-31 of the ScanFront 300/ 300P INSTRUCTIONS.) 12 IMPORTANT • When restarting the scanner, wait at least 5 seconds after turning the power OFF before turning it ON again. • If the scanner - Canon imageFORMULA ScanFront 300 | ScanFront 300/300P Setup Guide - Page 19
p. 17). For details on other settings, refer to the ScanFront 300/300P INSTRUCTIONS (electronic manual). The following items are only a few of the availavle settings Set the Device Name and IP Address. Yes Administrator password Set the password required to login to [Administrator setting] and the - Canon imageFORMULA ScanFront 300 | ScanFront 300/300P Setup Guide - Page 20
unique name that is different from those of all other devices. • Under default settings, the IP address is assigned automatically by the DHCP server. When setting] screen. No administrator password is set by default. 3. Press [Network setting]. The [Administrator Password] input box appears. 14 - Canon imageFORMULA ScanFront 300 | ScanFront 300/300P Setup Guide - Page 21
4. Confirm the [Device name] and [IP address]. Press [Shift] to switch, the entry screen to capital letters. 5. Press [Device name] (or [IP address]). A keyboard entry screen appears. 6. Enter the new device name (or IP address), and press [OK]. IMPORTANT • The device name is the name used to - Canon imageFORMULA ScanFront 300 | ScanFront 300/300P Setup Guide - Page 22
For details on other settings, refer to the Operation Guide and ScanFront 300/300P INSTRUCTIONS (electronic manual). IMPORTANT Make sure that the time zone is ). Hint No administrator password is set by default. If you set a password under the administrator settings, enter the password to log in. - Canon imageFORMULA ScanFront 300 | ScanFront 300/300P Setup Guide - Page 23
via e-mail, open the Server Settings screen from the Web Menu and register a mail server. For details, refer to "Server Settings" on p. 6-33 of the ScanFront 300/300P INSTRUCTIONS (electronic manual). Language/Timezone Setting Screen 17 - Canon imageFORMULA ScanFront 300 | ScanFront 300/300P Setup Guide - Page 24
procedure for sending scanned images from the Home screen. For more details, refer to the Operation Guide or the ScanFront 300/300P INSTRUCTIONS (electronic manual). 1. Place a document in the scanner. 2. Select a transfer destination by pressing a destination button. The [Address selection] screen - Canon imageFORMULA ScanFront 300 | ScanFront 300/300P Setup Guide - Page 25
5. Confirm that the selected address has a check mark, and press [Next]. The [Scan / Delivery Options] screen appears. 6. Confirm the scan settings, and press [Start]. • Press [Abort] to cancel the scanned images and return to the Scan/Delivery Options screen. • Press the [Continue] button to - Canon imageFORMULA ScanFront 300 | ScanFront 300/300P Setup Guide - Page 26
to the Home screen. Hint The screen that appears after images are sent can be selected in the settings. For details, refer to the Operation Guide. An address confirmation message appears. 20 - Canon imageFORMULA ScanFront 300 | ScanFront 300/300P Setup Guide - Page 27
INSTRUCTIONS AND UTILITIES CD-ROM. ❏ ScanFront Service ScanFront Service is software that supplements the network functions of the ScanFront details on operations, refer to the separate ScanFront 300/300P INSTRUCTIONS (electronic manual). INSTRUCTIONS AND UTILITIES CD-ROM to install the software - Canon imageFORMULA ScanFront 300 | ScanFront 300/300P Setup Guide - Page 28
SINGAPORE PTE. LTD. 1 HARBOUR FRONT AVENUE #04-01, KEPPEL BAY TOWER, SINGAPORE 098632 CANON HONGKONG COMPANY LTD. 19TH FLOOR, THE METROPOLIS TOWER, 10 METROPOLIS DRIVE, HUNGHOM, KOWLOON, HONG KONG. CANON KOREA BUSINESS SOLUTIONS INC. 168-12 SAMSEONG-DONG, GANGNAM-GU, SEOUL, KOREA PUB. CE-IE-784
Setup Guide
Read This First
Please read this manual before using the scanner.
After you finish reading this manual, keep it in a safe place
for future reference.