Canon imageFORMULA ScanFront 300 ScanFront 300/300P Setup Guide - Page 16

which indicates the cover has returned to its original

Get Canon imageFORMULA ScanFront 300 PDF manuals and user guides View all Canon imageFORMULA ScanFront 300 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 16 highlights

6. Lift up the roller lock lever a, and slide it in the direction of the arrow b. 9. Lower the roller lock lever to lock the feed roller into position. 7. Align the notch in the shaft of the roller with the shaft of the scanner, and place the feed roller into position. 10. Close the roller cover. Make sure you hear a click, which indicates the cover has returned to its original position. 8. Move the lock lever in the direction of the arrow, then insert it into the hole in the feed roller. 11. Gently close the panel unit. Press on both sides of the unit until you hear a click, which indicates the unit is locked. 12. Gently close the document eject tray. 10

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
10
6.
Lift up the roller lock lever
a
, and slide it in the
direction of the arrow
b
.
7.
Align the notch in the shaft of the roller with the shaft
of the scanner, and place the feed roller into position.
8.
Move the lock lever in the direction of the arrow, then
insert it into the hole in the feed roller.
9.
Lower the roller lock lever to lock the feed roller into
position.
10.
Close the roller cover. Make sure you hear a click,
which indicates the cover has returned to its original
position.
11.
Gently close the panel unit. Press on both sides of
the unit until you hear a click, which indicates the unit
is locked.
12.
Gently close the document eject tray.