Canon imageFORMULA ScanFront 300 ScanFront 300/300P Setup Guide - Page 19

5. Configuring the Scanner Settings To set up the scanner, you must configure the [Network setting] items under [Administrator setting] on the scanner unit, and configure settings on the Web Menu (Administrator Mode). This section describes the network settings configured under [Administrator setting] on the scanner (see p. 14), and date/time configuration and time zone confirmation in the Web Menu (Administrator Mode) (see p. 16), and mail server settings for sending images via e-mail (see p. 17). For details on other settings, refer to the ScanFront 300/300P INSTRUCTIONS (electronic manual). The following items are only a few of the availavle settings. The necessary configuration differs, depending on the scale of the network environment in which you plan to use the scanner. To use the scanner with the minimum required settings, you must register addresses to the Shared Address Book in addition to configuring the [Network setting] items. Setting Item Description Administrator setting Network setting Set the Device Name and IP Address. Yes Administrator password Set the password required to login to [Administrator setting] and the Web Menu. Yes Login type Select the screen that appears when users log in. Yes Register user Register the users who will use the ScanFront. No Register Shared Address Book Register entries in the Shared Address Book available to all users. No Register Shared Job Button Register the Shared Job Button available to all users. No Device Configuration Set the basic operations of the ScanFront (including network settings). No E-mail server settings Register the SMTP server to be used for sending email. No Authentication server settings Register a domain server that can search users with Active Directory. No Address book server settings Register an LDAP server that can search e-mail address books. No Web Menu (Administrator Mode) No Yes Yes Yes Yes Yes Yes Yes Yes Yes 13