Canon imageFORMULA ScanFront 300 ScanFront 300/300P Setup Guide - Page 20
Network Settings, The [Administrator Password] input box appears. - default password
View all Canon imageFORMULA ScanFront 300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
❏ Network Settings Follow the procedure below to confirm and configure the device name and IP address needed to connect the scanner to a network. IMPORTANT • The device name is the name used to identify the scanner on the network and is set to the 14 alphanumeric characters of the SF+MAC address by default. When changing this setting, make sure to select a unique name that is different from those of all other devices. • Under default settings, the IP address is assigned automatically by the DHCP server. When a DHCP server is not used, clear the [DHCP server Enable] check box, and enter a fixed address. For details, contact your network administrator. • The device name or IP address is used as the URL when accessing the Web Menu. Be sure to write down both the device name and IP address in case you forget them. 1. Press [Administrator setting]. 2. Press [OK] to display the [Administrator setting] screen. No administrator password is set by default. 3. Press [Network setting]. The [Administrator Password] input box appears. 14