Canon imagePROGRAF TM-200 MFP L24ei series User Manual - Page 148
Easy wireless connect
View all Canon imagePROGRAF TM-200 MFP L24ei manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 148 highlights
◦ Enable/disable Wi-Fi Select Enable to wirelessly connect via wireless router. ◦ Wi-Fi setup Select how to setup Wi-Fi. ■ Easy wireless connect Select if you specify the settings of the access point information to the printer directly from a device (e.g. smartphone, or tablet) without operating the wireless router. Follow the on-screen instructions of the connecting device for the setup procedure. ■ Manual connect Select when you perform settings for Wi-Fi manually using the operation panel of the printer. ■ WPS (Push button method) Select when you perform settings for Wi-Fi using a wireless router supporting a Wi-Fi Protected Setup (WPS) push button method. Follow the on-screen instructions during setup. ■ Other connection types ■ Manual connect (adv.) Select when you perform settings for Wi-Fi manually. You can specify multiple WEP keys. ■ WPS (PIN code method) Select when you perform settings for Wi-Fi using a wireless router supporting a Wi-Fi Protected Setup (WPS) PIN code method. Follow the on-screen instructions during setup. Note • By tapping Advanced, you can set LAN in detail. For the items that can be set, see the following. Advanced • Wireless Direct The following setting information on the Wireless Direct connection is displayed. (Some items are not displayed depending on printer settings.) Items Connection Network (SSID)/device name Password Communication mode Channel Wi-Fi security IPv4 address IPv4 subnet mask Setting Enabled (connected) / Enabled (disconnected) / Disable DIRECT-XXXX-TM-200 XXXXXXXXXX (10 characters) Wireless Direct 3 WPA2-PSK (AES) XXX. XXX. XXX. XXX (12 characters) XXX. XXX. XXX. XXX (12 characters) 148