Canon imagePROGRAF TM-200 MFP L24ei series User Manual - Page 152

◦ Set printer name Specifies the printer name. You can use up to 15 characters for the name. Note • You cannot use the same printer name as that already used for other LAN connected devices. • You cannot use a hyphen for the initial or last character of the printer name. ◦ TCP/IP settings Performs IPv4 or IPv6 setting. ◦ WSD setting Setting items when you use WSD (one of the network protocols supported in Windows 10, Windows 8.1, and Windows 7). ■ Enable/disable WSD Selects whether WSD is enabled or disabled. Note • When this setting is enabled, the printer icon is displayed on the Network Explorer in Windows 10, Windows 8.1, and Windows 7. ■ Optimize inbound WSD Selecting Enable allows you to receive the WSD printing data faster. ■ Timeout setting Specifies the timeout length. ◦ Bonjour settings Setting items for LAN using Bonjour. ■ Enable/disable Bonjour Selecting Enable allows you to use Bonjour to perform the network settings. ■ Service name Specifies the Bonjour service name. You can use up to 48 characters for the name. Note • You cannot use the same service name as that already used for other LAN connected devices. ◦ IEEE802.1X settings Performs various settings for IEEE802.1X. ◦ SNTP settings Performs various settings for SNTP (Simple Network Time Protocol). ◦ Spanning tree setting Enables/Disables spanning tree. Selecting Enable avoids circulating data on a network. ◦ LPR protocol setting Enables/Disables the LPR setting. 152