Canon imagePROGRAF TM-200 MFP L24ei series User Manual - Page 89

Printing From a Desired Starting Point Print on sheets from a desired starting point as follows. Setting Detect paper width to Disable 1. Tap paper settings display area on Home screen of operation panel. Note • If the Home screen does not appear, press the HOME button. 2. Tap Paper settings. 3. Tap Advanced. 4. Select Detect paper width and tap Disable. Load paper in the desired position to start printing from Follow these instructions to load paper at the desired starting position for printing when Detect paper width is set to Disable. 1. If you did not send a print job in advance, a menu for selection of the type of paper is displayed. Tap media type loaded. Note • If a print job was received before the paper was fed, the media type and size specified by the job are shown on the operation panel. Go to step 2. 2. When "[Detect paper width] is disabled. Do you want to keep it disabled and continue?" appears on operation panel, tap Keep it disabled and continue. 89