Canon imagePROGRAF TM-200 MFP L24ei series User Manual - Page 149

IPv4 default gateway IPv4 DNS dynamic setting IPv4 DNS host name IPv4 DNS domain name IPv6 link-local address IPv6 link-local prefix length MAC address IPsec settings Printer name Bonjour service name XXX. XXX. XXX. XXX (12 characters) Enable / Disable XXXXXXXXXXXX XXXXXXXXXXXX XXXX: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX (32 characters) XXX (up to 3 digits) XX:XX:XX:XX:XX:XX (12 characters) Disable XXXXXXXXXXXXXXX (up to 15 characters) XXXXXXXXXXXXX XXXXXXXXXXXXX XXXXXXXXXXXXX XXXXXXXXXXXXX (up to 52 characters) ("XX" represents alphanumeric characters.) To change the setting, tap Settings. ◦ Enable/disable Wireless Direct Select Enable to wirelessly connect without wireless router. ◦ Update SSID/password Updates the identifier (SSID) and password. ◦ Wireless Direct device name Changes the name (device name) of the printer displayed on Wi-Fi Direct compatible device. ◦ Connection request confirmation Changes the display / non-display of the confirmation screen when Wi-Fi Direct compatible devices are connected to the printer. Note • By tapping Advanced, you can set LAN in detail. For the items that can be set, see the following. Advanced • Wired LAN The following setting information on the Wired LAN connection is displayed. (Some items are not displayed depending on printer settings.) Items Connection IPv4 address IPv4 subnet mask Setting Enabled (connected) / Enabled (disconnected) / Disable XXX. XXX. XXX. XXX (12 characters) XXX. XXX. XXX. XXX (12 characters) 149