Canon imagePROGRAF TM-200 MFP L24ei series User Manual - Page 237

Setting Mail Server To use mail function, specify the mail server settings. Note • If you did not specify the time zone setting using the printer's operation panel, a message to inform you that the correct time may not be reflected on the sent e-mail appears. We recommended that you set the time zone setting using the printer's operation panel. For the time zone setting, see Other device settings. • These functions can be set only when you are logged in administrator mode. 1. Start up Remote UI. 2. Select Device settings. 3. Select Set mail server. The setting items for mail server appear. 4. Specify mail server settings. Specify the following items. Sender address Enter the e-mail address of the sender (this printer). Outgoing mail server (SMTP) Enter the address of your SMTP server. Port number (SMTP) Enter the port number of your SMTP server. Secure connection (SSL) Select if you use the secure connection (SSL). Don't verify certificates Select if you do not verify the certificate. Authentication method Select one of the following authentication methods. SMTP authentication Select if you send e-mail with SMTP authentication. Then select OK, and then make the following settings. Outgoing account Enter the account name for sending to perform the authentication. Outgoing password To set / change the password for sending in order to perform the authentication, check the Set/change password and then enter the password. 237