Canon imagePROGRAF TM-200 MFP L24ei series User Manual - Page 803
Checking for Nozzle Clogging, Cleaning the Print Head, Automatic Adjustment to Straighten Lines
View all Canon imagePROGRAF TM-200 MFP L24ei manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 803 highlights
4937 Cause Print head position adjustment failed. What to Do Tap OK on the touch screen to dismiss the error and retry Print head alignment following the steps below. 1. Print a test pattern to check the nozzles. Checking for Nozzle Clogging 2. If the nozzle is blocked, clean the print head. Cleaning the Print Head 3. Retry Print head alignment. Automatic Adjustment to Straighten Lines and Colors If any print head nozzles are still blocked, replace the print head. Replacing the Print Head If the error appears again, the printer may be damaged. Contact a Canon customer service center. 803
4937
Cause
Print head position adjustment failed.
What to Do
Tap
OK
on the touch screen to dismiss the error and retry
Print head alignment
following the steps
below.
1.
Print a test pattern to check the nozzles.
Checking for Nozzle Clogging
2.
If the nozzle is blocked, clean the print head.
Cleaning the Print Head
3. Retry
Print head alignment
.
Automatic Adjustment to Straighten Lines and Colors
If any print head nozzles are still blocked, replace the print head.
Replacing the Print Head
If the error appears again, the printer may be damaged. Contact a Canon customer service center.
803